Technical Specifications - NETGEAR CG3100 User Manual

Factory Default Settings (Continued)
Wireless Wireless communication
SSID name
Security
Broadcast SSID
Transmission speed
Country/region
RF channel
Operating mode
Data rate
Output power
Access point
Authentication type
Wireless card access list
1. Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will
vary. Network conditions and environmental factors, including volume of network traffic, building materials
and construction, and network overhead, may lower actual data throughput rate.

Technical Specifications

The following table describes the technical specifications for the gateway.
Technical Specifications
Network protocol and
standards compatibility
Power adapter
Physical specifications
Environmental
NETGEAR Wireless Cable Gateway
Enabled
As shown on the product label.
WPA/WPA2
Enabled
1
Auto
Depends on the country where the product is sold.
Auto
n, g, and b
Best
Full
Enabled
Open System
All wireless stations allowed
Data and Routing Protocols: TCP/IP, DHCP server and client, DNS relay, NAT
(many-to-one),
TFTP client, VPN pass through (IPSec, PPTP)
• North America (input): 120V, 60 Hz, input
• All regions (output): 12 V DC @ 2.5A output 30W maximum
• Dimensions: 8.5 by 5.75 by 1.3 in (216 by 146 by 33 mm)
• Weight: 0.95 lb (0.42 kg)
• Operating temperature: 32° to 140° F (0° to 40° C)
• Operating humidity: 90% maximum relative humidity, noncondensing
• Electromagnetic emissions: Meets requirements of: FCC Part 15 Class B.
Technical Specifications
51