Wi-Fi Multimedia - NETGEAR CG3100 User Manual

Wi-Fi Multimedia

You can use the Multimedia page to set up wireless multimedia Quality of Service (QoS).
Log in to the gateway as described in
1.
In the main menu, under Setup, select Wi-Fi Multimedia.
2.
In the WMM Support field, select On to enable WMM.
3.
In the No-Acknowledgement field, select Off or On to specify whether acknowledgement
4.
(ACK) messages are used.
Usually, this field is set to Off. This might improve the efficiency of packet transmission. If
wireless communication quality is poor at your location (this could happen if there is a lot
of interference), set this field to On so that you are notified when a package is lost.
To conserve battery power in smaller devices that are connected to the gateway, set the
5.
Power Save Support field to On.
Click Apply to save your settings.
6.
NETGEAR Wireless Cable Gateway
Log In to Your Gateway
Wireless Configuration
20
on page 9.