Technical Specifications - NETGEAR D2200D-1FRNAS User Manual

Table 1. Factory default settings (continued)
Feature
Firewall Inbound (communications coming
in from the Internet)
Outbound (communications going
out to the Internet)
Wireless Wireless communication
SSID name
Security
Broadcast SSID
Country/region
Wireless RF channel (2.4 GHz)
(continued)
Operating mode
1. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network
overhead, lower actual data throughput rate.

Technical Specifications

Table 2. Gateway specifications
Feature
Data and routing protocols
Power adapter
(North America)
Dimensions
Weight
Operating temperature
Operating humidity
Electromagnetic emissions
LAN
WAN
Wireless
Radio data rates
ADSL2+ Gateway
Default behavior
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Enabled
See the product label
WPA2-PSK (AES)
Enabled
United States
1
Auto
Up to 300 Mbps at 2.4 GHz
Description
TCP/IP, DHCP, Dynamic DNS, UPnP, and SMB
120V, 60 Hz, input
12V/3.5A DC output
Dimensions: mm x mm x mm ( in. x in. x in.)
Weight: g (0. lb)
0° to 40° C (32º to 104º F)
90% maximum relative humidity, noncondensing
FCC Part 15 Class B
10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45
24 x 8 DOCSIS 3.0 WAN Interface
Maximum wireless signal rate complies with the IEEE 802.11 standard. See the
footnote for the previous table.
Auto Rate Sensing
DRAFT
Supplemental Information
79