NETGEAR CG3100 User Manual page 15

your ISP. If you are using static IP addressing, this setting matches the cable network that
follows.
Network Configuration Cable. You can define settings for the WAN side of your gateway in
this section.
Dynamic IP / Static IP. Select Dynamic IP If you want to get the settings dynamically
from your ISP. Select Static IP if you want to manually configure the network.
If you select Static IP, you have to set the following values.
Static IP Address. Enter the WAN IP address of your gateway.
•
Subnet Mask. Enter subbred mask the IP WAN.
•
Default Gateway. Type the IP address of the default gateway.
•
Primary DNS. Enter the IP address of primary server.
•
Secondary DNS. Enter the IP address of secondary DNS.
•
Tertiary DNS. Enter the IP address of the tertiary DNS.
•
Device Name. Enter the name or alias for the router. You can find the name of the
•
router in Windows Vista and in the web browser for all Windows systems.
Click Apply when you are finished changing your settings.
NETGEAR Wireless Cable Gateway
Wireless Configuration
15