Default Settings And Technical Specifications; Factory Default Settings - NETGEAR CG3000D User Manual

Default Settings and Technical Specifications

Factory Default Settings

You can return the gateway to its factory settings. On the bottom of the gateway, press and hold the
Restore Factory Settings button
factory settings. Your device will return to the factory configuration settings shown in the
following table.
Gateway Login
User login URL
User name and password (case
sensitive)
Local Network (LAN)
LAN IP
Subnet mask
DHCP server
DHCP starting IP address
DHCP Ending IP address
Firewall
Inbound communication from the Internet Disabled (except traffic on port 80, the http port)
Outbound communication to the Internet Enabled (all)
Source MAC filtering
Internet Connection
WAN MAC address
WAN MTU size
Default Settings and Technical Specifications
for over 7 seconds. The gateway resets, and returns to its
http://192.168.1.1
admin/password
192.168.0.1
255.255.255.0
Enabled
192.168.0.10
192.168.0.19
Disabled
Use default hardware address
1500
v1.0, September 2009
Appendix A
A-1