About The Mps Series; Mps Series Features - Extron electronics MPS 112 User Manual

Media presentation switchers
Hide thumbs Also See for MPS 112:
Table of Contents

Advertisement

Introduction

About the MPS Series

The Extron MPS 112 and MPS 112CS are media presentation switchers featuring
three A/V switchers and a program audio switcher with microphone pre-amplifier
and mute controls in one product. The A/V switchers include a four input, one
output VGA/audio switcher; a four input, one output S-video/audio switcher; and
a four input, one output composite video/audio switcher. The MPS 112 and
MPS 112CS accept microphone input and mix the microphone signal with the main
audio in "talk-over" mode. Both models have an RS-232 control port. The MPS
112CS also features switchable 48 V phantom power for the microphone.
The MPS Series is a one box solution for small presentation systems.
Throughout this manual both models of this switcher are referred to as "MPS" or
"MPS 112" if the instructions are not model-specific.

MPS Series Features

Multiple video inputs — Twelve inputs can include four VGA (or SVGA, UXGA,
Multiple video outputs — Three outputs for simultaneous (in Separate mode), or
Multiple audio inputs — Twelve inputs can include four in the VGA group on
Multiple audio outputs — One output for each group (VGA, S-video, and Video),
Program audio switcher — A three input, one output stereo audio switching
Bandwidth — Bandwidth is 350 MHz (-3 dB), typical for VGA video, allowing
Microphone input — The built-in microphone amplifier is switchable with
Front panel security lockout (Executive mode) — Locks out all front panel
RS-232 remote control — Allows remote control of the MPS switcher using
Rack-mountable — The 1U high, full rack width, metal enclosure is rack-
1-2
MPS Series • Introduction
RGBHV, RGBS, RGsB, or RsGsBs) inputs on 15-pin HD female connectors,
four S-video (NTSC, PAL, or SECAM) inputs on 4-pin mini DIN female
connectors, and four composite video (NTSC, PAL, or SECAM) inputs on
BNC female connectors.
one at a time (in Single mode) display on VGA, S-video, or composite video
devices.
3.5 mm female stereo mini jacks, four in the S-video group on pairs of female
RCA connectors, and four in the Video group on pairs of female RCA
connectors.
plus Program Out.
system allows the audio input of any video group to be selected for program
audio output, with volume and mute control. The MPS 112 features
unbalanced program audio output on RCA connectors, while the MPS 112CS
has balanced/unbalanced program audio output on a 5-pole captive screw
connector.
this switcher to switch everything from NTSC video to high-resolution
computer displays.
microphone power (MPS 112 – 15 V and MPS 112CS – 48 V phantom power).
The MPS 112 features unbalanced microphone input on one 1/4" (6.3 mm) jack,
while the MPS 112CS has balanced/unbalanced microphone input on a 3-pole
captive screw connector. The switcher includes a Mix button for "talk-over,"
with adjustable threshold control and mix volume control.
functions except input selection and program volume control to prevent
unwanted setting changes.
Extron's Simple Instruction Set (SIS
Windows
®
, or a control system.
mountable, with supplied rack mounting brackets.
), Extron's control software for

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mps 112cs

Table of Contents