The specified file is not a valid PSA configuration, upgrade
file.
The specified upgrade file cannot be used to upgrade this
PSA. Please check for a newer upgrade file.
The upgrade file has been transferred successfully. You
will need to restart your PSA for the upgrade to take
effect.
The upgrade has successfully completed.
The upgrade, etc. is in progress.
This appliance cannot be configured, upgraded with this
upgrade, restore file version. Please check for a newer
version, upgrade file.
Validating the checksum.
Event Log Page
Click here to view possible events in the Event Log.
Message
Please select at least one category to view.
Please select at least one level to view.
Retype the complete path to the configuration file
(for example, "C:\TEMP\file.HP") or click Browse to
find the saved file or firmware image.
Verify the file is a valid PSA file whose firmware
version is later than the current firmware for your
PSA. Then retry the
Confirmation message.
Confirmation message.
A backup, restore, or upgrade is already in progress.
Please wait until it is complete before attempting
another process.
Verify the file is a valid PSA file and then retry the
upgrade
process.
Informational message.
Explanation / Remedy
On the Filters page in the Event Log, at least one
category must be selected:
Security (SEC)
Networking (NET)
Administrative (ADM)
On the
Filters page
in the
must be selected:
Critical (CRIT)
Error (ERR)
Informational (INFO)
upgrade
process.
Event Log
at least one level