System; Dns/Wins Servers - HP 4250 User Manual

System

The values in the section are updated every minute.
Parameter
System Load (past 15 minutes):
Disk Usage

DNS/WINS Servers

The values in this section are updated each time status is gathered.
Parameter
DNS IP Address
Connection Status
WINS IP Address
Description
This metric ranges from 0% to 100% and shows how heavily the PSA has been
used in the past 15 minutes. If the System Load often displays over 80%, the
PSA is overloaded and some of the printers should be migrated to another PSA.
This metric ranges from 0% to 100% and shows the amount of spool disk in
use. If the Disk Usage value is
above 80%: an error log is generated.
above 90%: a critical log is generated
100%: the PSA will not be able to print. The most common reason for
high disk utilization is that one or more printers is not printing and
print jobs are accumulating on the PSA for that printer or printers.
Check the Printer Status on the Diagnostic Report page to see if this is
true.
High spool utilization can also indicate that the PSA is overloaded. If the PSA is
frequently overloaded, some of the printers should be migrated to another PSA.
Description
IP address of the DNS server
Valid statuses are
Connected
Cannot be contacted: The DNS server cannot be found. It does not
respond to a network query or ping.
No entry: The forward entry, the reverse entry, or both forward and
reverse entries for the PSA are missing from the DNS server. These
entries should be added to the DNS server.
IP address of the WINS server