Date / Time Page - HP 4250 User Manual

Are you sure you want to remove the following
drivers...?
The HP LaserJet 4 printer driver is essential and
cannot be deleted.
The following drivers are in use and cannot be
deleted.... To delete these drivers, you must either
delete the printers that use them, or associate a
different driver with those printers.
Cannot add drivers using this operating system and/
or browser.
To add drivers, your PC must be running one of the
following OSs and browsers:
Windows NT 4.0, Windows 2000, or Windows
XP
Internet Explorer 5.0 (or above) or Netscape
4.7 (or above)
You attempted to delete more than one active driver.
Only one active driver may be deleted at a time. Only
the first active driver in the list will be deleted.
Deleting this XP/2K driver will require initialization of
the NT driver, which requires you to have
administrative priveleges both on this PC and on the
PSA.
You attempted to delete the following active CSR
driver(s): ... To delete an active CSR driver you must
either turn off Client Side Rendering on the print
shares that use it, point those shares to a different
driver, or delete those shares entirely.

Date / Time Page

Message
Invalid Date
The date must be in mm/dd/yyyy format.
Invalid Time
The time must be entered in the format hh:mm:ss.
Invalid Time/Date
The date and/or time fields contain non-numeric
character(s).
One or more drivers were selected and
pressed. Confirm removal or cancel the operation.
The HP LaserJet 4 printer driver is a default driver and
cannot be deleted.
You attempted to delete the listed active driver(s). To
delete an active driver you must either delete the print
shares that use it, bind those print shares to a different
printer driver, or the driver you are deleting must be an
NT or 2K/XP driver where another (non-9x) version of
that driver still exists on the PSA.
An attempt was made to add a driver to the PSA from an
unsupported platform. A combination of the specified
operating systems and browsers is needed in order to run
the driver initialization functionality needed to install a
new driver on the PSA.
More than one active driver is selected for deletion.
Active drivers must be deleted one at a time, so that the
corresponding NT version of the driver can be properly
initialized.
An XP/2K driver that is in-use has been selected for
deletion. You should cancel the delete operation if you do
not have appropriate priveleges. Then log back in as an
appropriate user and delete the driver. Or, you can
proceed with this delete and then log back in as an
appropriate user later and initialize the driver using the
Initialize button.
An in-use driver capable of client side rendering is
selected for deletion. Before if can be deleted, any
queues using this driver must be deleted or pointed to a
different driver (including the non-client side rendering
version of this driver), by unchecking the client side
rendering box.
Explanation / Remedy
Retype the date in mm/dd/yyyy format.
Retype the time in hh:mm:ss format.
The date and/or time fields may only contain numbers
and the specified separator characters. Retype the date
and/or time using the correct format and characters.
was