Tcp/Ip And Dns Settings Page; Microsoft Network Settings Page - HP 4250 User Manual

The necessary information to set the date and time
was not found. The date and/or time fields are blank.
Your date and time settings have been applied.

TCP/IP and DNS Settings Page

Message
DNS server IP address cannot be contacted.
Gateway is not a valid gateway for IP address IP
address and subnet mask subnet mask.
Invalid DNS Server Address
The DNS server address address must be in the
format xxx.xxx.xxx.xxx.
Invalid Domain Name
The DNS Domain Name must be alphanumeric with no
spaces. Dashes (-) and periods (.) are acceptable.
Invalid Gateway Address
The gateway address must be in the format xxx.xxx.
xxx.xxx. If the gateway address is unknown, use the
PSA's IP address.
Invalid IP Address
The IP address must be in the format xxx.xxx.xxx.xxx.
Invalid Subnet Mask
The subnet mask must be in the format xxx.xxx.xxx.
xxx.
NAC Internal Error
Restarting network, please wait.
Your network settings have been updated.
This field's value is being assigned by DHCP. If you
remain in DHCP mode, your changes to this field will
be lost.
WINS server IP address cannot be contacted.

Microsoft Network Settings Page

Complete both fields and click
Confirmation message.
Explanation / Remedy
Informational.
The IP address of the gateway is unreachable with the
currently assigned PSA IP address and subnet mask.
Retype the DNS server address in the xxx.xxx.xxx.xxx
format.
Note: This must be the DNS server's IP address, not its
friendly name. If the network does not have a DNS
server, leave this field blank.
Retype the DNS Domain Name. Use only alphanumeric
characters with no spaces. Dashes ( - ) and periods ( . )
are acceptable.
Gateway addresses are written as four numbers
separated by periods, where the first number is between
1 and 255 and the other three numbers are between 0
and 255. Retype the gateway address in the format xxx.
xxx.xxx.xxx. If the address is unknown, use the PSA's IP
address.
IP addresses are written as four numbers separated by
periods, where the first number is between 1 and 255
and the other three numbers are between 0 and 255.
Retype the IP address in the format xxx.xxx.xxx.xxx.
Subnet masks are written as four numbers separated by
periods, where the first number is between 1 and 255
and the other three numbers are between 0 and 255.
Subnet masks must be well formed to match your
network.
Retype the subnet mask in the format xxx.xxx.xxx.xxx.
Retry the operation.
Confirmation message.
Self-explanatory.
Informational.
.