HP 4250 User Manual page 38

Print Server Type a name for the PSA. The PSA name will be displayed:
Appliance
Name
If the network uses DNS to identify network resources, this name should match the DNS
name.
The PSA name can contain up to 15 alphanumeric characters. It may also contain hyphens
( - ) and underscores (_). (This name cannot begin with a hyphen (-), but it can have a
hyphen within the name. The hyphen cannot be the first character because the PSA name is
also used as a host name, and the hyphen character is not allowed as the first character in a
host name.)
Primary (Windows Internet Name Server) Enables network resources (such as PCs and printers) to
WINS Server be specified by their friendly names instead of their IP addresses. In order to use this
Address functionality, specify the primary WINS server by its IP address, not by its friendly name.
Once the primary WINS server is specified, use friendly names across other configuration
areas of the PSA (such as the queue configuration screen).
If the network does not have a WINS server configured, leave this field (and the next field)
blank. Without a WINS server configured, Windows 95, 98, and ME clients may be unable to
print to a PSA located on a different subnet. Domain integration may behave unpredictably
if this field is blank.
Secondary If the primary WINS server is unavailable, this secondary server will be contacted. Specify
WINS Server the secondary WINS server by its IP address, not by its friendly name.
Address
If the network does not have a WINS server configured, leave this field blank (or empty).
Windows Specify the Windows domain or workgroup (NT, 2K, or Windows Server 2003) to which this
Domain or PSA belongs. The PSA will appear under this name in Network Neighborhood.
Workgroup
Enable Check this box to enable domain security for the PSA (for NT, 2K, or Windows Server 2003).
Domain Uncheck the box to disable domain security. (The default is disabled.)
Authentication
Automatically Select this to automatically discover the domain controller for the domain or workgroup as
Discover specified above in the Windows Domain or Workgroup field (for NT, 2K, or Windows
Domain Server 2003) .
Controllers
Manually Select this to manually specify the domain controllers for NT, 2K, or Windows Server 2003.
Specify
Domain
Controllers
Domain Type the domain controller's name or IP address to be added to the list of Configured
Controller Domain Controllers; click
In the Network Neighborhood and in My Network Places on each client workstation.
Both are visible from Microsoft Windows Explorer.
On the Overview page in the web interface for the PSA.
On the front panel of the PSA.
to add it to the list.