Table of Contents
Advertisement
RGB Delay Times
Miscellaneous Options
Downloading from Extron's IR Projector Library
Figure 4-6. Saving the downloaded file.
_______ To download the latest version of the System 5 Windows® Control
Saving a Configuration to a File
Figure 4-7. Save and restore a System 5 configuration.
________ The operations described here are subject to change without notice and
Extron • System 5 cr Switcher • User's Manual
The RGB delay time switches the video off before switching the sync off.
4
It then switches the sync for the new input before switching the video on.
This assures a stable image on the screen. RGB Delay can be set from
this Windows panel. Slide the scroll bar to select from 0 seconds to 5
seconds, in 0.5 second steps.
These options may not be the same on all systems. Each one is
5
explained in the Help screen by clicking on the panel option. Repeat
Power Down is for projectors that require a second power down command
as confirmation. Click the check box to activate the desired option.
From Extron's website (www.extron.com), select Download and then
Projector Drivers. A table of projector names, models and drivers will
display. Locate the manufacturer and model and click on the File Name
(hyperlink). Here is an example on one projector:
Manufacturer
Model
Hughes/JVC
G10
After selecting the software
to download, you will be
asked where to save it.
From the File Download
window, select Save this
file to a disk. From the
Save as window direct it to
the path:
(drive):\system5\drivers\
Click the OK button.
Note that projector drivers
have the extension .5cr.
To activate a projector driver from the Control Software, drop down the
File menu and select Restore Configuration from... and direct it to the
drivers folder (under the System 5 folder) and select the driver file name.
software, select Download, Control Software, and then System 5cr.
Once a System 5 has been configured, whether it be from downloading,
IR learning, front panel settings, or a combination of these, the current
configuration can be saved as a file (*.sy5) and loaded again later. Any
number of configuration files may be saved and restored. This eliminates
having to set up the system for each application again and again. Saving
and restoring system configuration files is done from the File menu, as
shown in the example to the left.
are intended as an overview. This includes the System 5 operation as well
as the Extron web site. Use the Help screens for the latest functions and
descriptions.
Chapter 4 • Windows® Control Software
File Name
HJC_G10.5CR
Rev. #
Rev. Date
A
11/13/98
4-4
Advertisement
Table of Contents
