Tftp Generic Setup; Avaya Tftp (Suite Pro) - Avaya 4600 Series Administrator's Manual

TFTP Generic Setup

The following phases are involved in setting up a TFTP server.
Install the TFTP server software. The two sections that follow describe how to install and
●
configure Avaya's TFTP application.
Configure the file path parameter to the directory where the files are to be stored. This is
●
the file path in
Server on page 53. For increased security, we also recommend that you disable the ability
to upload to the server. Note that this option might not be available to all TFTP servers.
Download the upgrade script file and application file from the Avaya Web site
●
(http://www.avaya.com/support) to the directory as specified by the file path.
Note:
Many LINUX servers distinguish between uppercase and lowercase names.
Note:
Ensure that you accurately specify the 46xxsettings filename, and the names and
values of the data therein.

Avaya TFTP (Suite Pro)

Configuration
Use the following procedure to configure the Avaya TFTP server:
1. Run the TFTP Suite Pro Server by selecting:
Start-->Programs-->Avaya TFTP Server-->TFTPServer32.
The TFTP server starts.
!
CAUTION:
You must restart Avaya TFTP manually whenever you reboot your TFTP server
CAUTION:
machine.
2. Select System-->Setup.
3. Enter the following values:
On the Outbound tab page: 1.
The Outbound path is the TFTP file path as recorded in
Information Before Installation - Per DHCP Server
Check the Enable Path options.
Under the Options tab page: turn on the No Incoming option. Under the Client Limits
tab page: Drag the slide bar all the way to the right to set the Maximum Simultaneous
Clients to infinite.
Table 2: Required Network Information Before Installation - Per DHCP
TFTP (H.323 Only)
Table 2: Required Network
on page 53.
Issue 2.3 November 2005 67