Windows 2000 Dhcp Server; Verifying The Installation Of The Dhcp Server - Avaya 4600 Series Administrator's Manual

Server Administration
Verify the Scope Option, 176 46XXOPTION
Use the following procedure to verify the scope option:
1. Select Scope under DHCP OPTIONS.
2. In the Active Options: scroll list, click 176 46XXOPTION.
3. Click the Value button.
4. Verify that the Value String box contains the correct string from
page 54.
If not, update the string and click the OK button.
Verify the Global Option, 176 46XXOPTION
Use the following procedure to verify the global option:
1. Select Global under DHCP OPTIONS.
2. In the Active Options: scroll list, click 176 46XXOPTION.
3. Click the Value button.
4. Verify that the Value String box contains the correct value from
page 54. If not, update the string and click the OK button.

Windows 2000 DHCP Server

This section describes the configuration of the DHCP server in Windows 2000

Verifying the Installation of the DHCP Server

Use the following procedure to verify whether the DHCP server is installed.
1. Select Start-->Program-->Administrative Tools-->Computer Management.
2. Under Services and Applications in the Computer Management tree, find DHCP.
3. If DHCP is not installed, install the DHCP server. Otherwise, proceed directly to
and Configuring a DHCP Scope
62 4600 Series IP Telephone Release 2.3 LAN Administrator Guide
for instructions on server configuration.
DHCP Generic Setup
DHCP Generic Setup
®
.
Creating
on
on