Figure 4-1. Rear View Of The Fibre Channel Router - HP FIBRE CHANNEL TO SCSI ROUTER M8201R Installation And User Manual

Configuring the Fibre Channel to SCSI Router for
the NonStop NS-Series Server

Figure 4-1. Rear View of the Fibre Channel Router

Note. WWN stands for worldwide name.
Note. WWP stands for worldwide port.
2. To start the tape drive on the server, issue this command in SCF:
SCF> START TAPE $tape
Example:
SCF> START TAPE $TAPE1
For complete details about the ADD and START commands, including command
syntax, see the SCF Reference Manual for the Storage Subsystem.
M8201R Fibre Channel to SCSI Router Installation and User's Guide —529971-005
WWNN: 100000E00200F000
WWPN: 100000E00C00F000
ENET MAC ID: 00:E0:02:00:00:XY
4 -2
Configuration
WWN Name
WWP Name
Ethernet MAC ID
(Physical Address)