Table of Contents
Advertisement
Getting Started
Figure 2-3. Attaching Ear Brackets
8. If you are mounting the Fibre Channel to SCSI router in the rack with the ports
facing inside the rack (shown in
outside the rack (shown in
brackets to the rack using two of the #M6x12 Phillips screws for the front of each
ear bracket. Tighten the screws securely.
WARNING. To reduce injury or equipment damage, the mounting brackets must be level. If the
brackets are not level, the Fibre Channel to SCSI router cannot be installed correctly.
M8201R Fibre Channel to SCSI Router Installation and User's Guide —529971-005
Figure 2-4
on page 2-6) or with the ports facing
Figure 2-5
on page 2-7), attach the front of the mounting
2 -5
Installation Procedure With Ear Brackets
Advertisement
Table of Contents
