Table of Contents
Advertisement
Using the Serial Interface
Ethernet Configuration
This option allows for setting up all Ethernet network settings, including IP address,
Subnet mask, IP gateway, SNMP and security settings, Ethernet mode, physical
address, and host name.
Figure B-2. Ethernet Configuration Menu
IP Address
Subnet Mask
IP Gateway
Ethernet Physical Address
Ethernet Mode
Hostname
DHCP Configuration
1) Change IP Address
2) Change IP Subnet Mask
3) Change IP Gateway
4) Change Ethernet Physical Address
5) Toggle Ethernet Mode
6) Change Hostname
7) Toggle DHCP Configuration
8) Change SNMP Settings
9) Change Security Settings
X) Return to previous menu
•
Select 1 to change the IP address of the Fibre Channel to SCSI router. The default
for this setting is 192.231.36.101.
•
Select 2 to change the IP subnet mask for the Fibre Channel to SCSI router. The
default for this setting is 255.255.255.0.
•
Select 3 to change the IP gateway for the Ethernet network of the Fibre Channel to
SCSI router.
•
Select 4 to change the Ethernet physical address, or MAC address, of the Fibre
Channel to SCSI router. Ethernet physical addresses are always assigned to
Ethernet adapters by the manufacturers.
M8201R Fibre Channel to SCSI Router Installation and User's Guide —529971-005
Ethernet Configuration Menu
X.XX.XX XXXXXX XXXXXX-XXX_XXXXXXXXXXXXXX
01/06/2003 08:56:22
: 192.231.36.101
: 255.255.255.0
: 0.0.0.0
: 08:06:07:05:03:09
: 10/100Mbps (Auto-Neg)
:
: Disabled
B- 3
Ethernet Configuration
Advertisement
Table of Contents
