Table of Contents
Advertisement
Installing the Fibre Channel to SCSI Router for the
NonStop NS-Series Server
5. Connect the larger end of the SCSI cable to SCSI port 1 on the rear panel of the
tape drive. See
Figure 3-4. Front View of the Tape Drive
Figure 3-5. Rear View of the Tape Drive
Port 1
Note. Tape drives are preconfigured to SCSI ID 5.
M8201R Fibre Channel to SCSI Router Installation and User's Guide —529971-005
Figure 3-5
for the location.
Port 2
Power Switch
AC Power Receptacle
3 -4
Installation
Advertisement
Table of Contents
