Table of Contents
Advertisement
number from 1 ~4.
b.
Type: Select Normal Close (NC), Normal Open (NO), NIGHT NC, NIGHT NO, or OFF
for alarm type.
NC: Enable a normal close alarm input.
NO: Enable a normal open alarm input.
NIGHT NC: Set camera at night mode with normal close alarm input. When there is
event triggered, the camera will be changed to day mode.
NIGHT NO: Set camera at night mode with normal open alarm input. When there is
event triggered, the camera will be changed to day mode.
OFF: Disable alarm input.
ALARM INPUTS
<┘
ALARM OUTPUTS
<┘
EXIT
c. REACTION: The action will be taken when alarm is triggered.
OFF: No reaction will be taken when alarm is triggered.
POSITION: When the alarm is triggered, speed dome will go to the preset position.
Turn the joystick Left or Right to select on Position and press Enter key to select
position number. Turn joystick Left/Right to make selection. It is selectable from
1~192. Press Enter key again to confirm selection.
PATTERN: When the alarm is triggered, speed dome will run the pattern. Turn the
ALARM INPUTS
INPUT NO. 1
TYPE
REACTION POSITION
DURATION TIMEOUT
PRIORITY
RETURN
(diagram 3.25)
54
NO
1
<┘
5
<┘
1234
Advertisement
Table of Contents
