Philips 107E61/00 Service Manual page 71

GENERAL PRODUCT SPECIFICATION
4.13 Purity
Test patterns : Full white / Red / Green / Blue.
Conditions : As stated in item 4.0, the purity must be checked under specific
After warming-up time of 30 min., no color stains may occur in the above four patterns.
4.14 Moire
Condition: Display a full white pattern. At any preset mode ,
The clouding effect must not rise to disturbing levels in anywhere of the screen with
luminance setting from 15 to 30 FL.
4.15 Blemish
Blemish shall be in accordance with CRT specification.
5.0 Mechanical characteristics
5.1 User controls
-
Power ON/OFF key
-
LightFrame key
- 3 Key digital user control (OSD)
5.2 Connectors and cables
5.2.1 Power cord type : 3 leads plugable power cord
Length
Safety requirements
Countries
Germany
Switzerland
Belgium
Sweden
Finland
Norway
Denmark
Italy
Netherlands
U.K.
U.S.A.
Canada
Australia
17" V32 GS4 107E6-71K CMTR
TYPE
BRAND : PHILIPS
2004-06-11
P.S.SU
destinations of earth magnetic environments and the monitor
must be well degaussed.
the display size must be set as Fig.1.
with protective earthed plug or IBM Hooded
: 1.5 m ± 50 mm (excluding connector)
: See following.
Approval
Mains plug Wire
VDE VDE
-- SVE
CEBEC --
SEMKO SEMKO SEMKO
EI --
NEMKO NEMKO --
DEMKO DEMKO
OVE --
KEMA KEMA
ASTA HAR
UL UL
CSA CSA
SAA SAA
:107E61/00
2004-06-11
Connector
VDE
SVE
--
EI
DEMKO
OVE
KEMA
ASTA
UL
CSA
SAA
8639 000 15582
18
31
590
107E6 CRT
71
Go to cover page