Philips 107E61/00 Service Manual page 22

22 107E6 CRT
Go to cover page
2. Select the DDC2B as the communication channel.
And software DDC only As shown in Fig. 11.
3. Click OK button to confirm your selection.
4. Click icon (Read EDID function) to read DDC EDID data from
monitor. The EDID codes will display on screen as shown in Fig. 12.
Step 3: Modify DDC data (verify EDID version, week, year)
1. Click (new function) icon from the tool bar, bring up
Step 1 of 9 as shown in Fig. 13 .
EDID301 DDC application provides the function selection and
text change (select & fill out) from Step 1 to Step 9.
To Printer port
DC 8~12V
To Monitor
D-sub/DVI cable
Fig. 13
Step 4: Modify DDC data (Monitor Serial No.)
Next
1. Click , bring up Fig. 14.
DDC Instructions (Continued)
Fig. 11
Fig. 12
Next
2. Click , bring up Fig. 15.
Next
3. Click , bring up Fig. 16.
Fig. 14
Fig. 15
Fig. 16