Philips 107E61/00 Service Manual page 66

107E6 CRT
66
Go to cover page
3.2.1 Horizontal scanning
Scanning frequency : 30 - 71 KHz
H-shift range
3.2.2 Vertical scanning
Scanning frequency : 50 - 160 Hz
V-shift range
3.3 Power supply
The display device maintains the specified performance in the range
described as below :
230V version 1.5A Max.
Power consumption : 75 Watts Max.
Power cord length
Power cord type
3.4 Power saving management system
On
Off
Off
Off
Remark: Transition time from ON to any power saving mode will have 5
seconds delay.
3.5 CRT Description
This display unit employs a high resolution CRT complying with the following
specifications :
Dimensions
Pitch
Deflection angle
Light transmission
55%(SDI)
Face treatment
Implosion protection
EHT
Visible screen area
CRT Source
2004-06-11
P.S.SU
GENERAL PRODUCT SPECIFICATION
: ± 10 mm Min. (for preset modes only)
: ± 10 mm min. (for preset modes only)
Type Mains current
: 1.5M
: 3 lead plug power cord
with protective earth plug or IBM hooded
Signal
H-Sync V-Sync
Active Active
Inactive Active
Active Inactive Blanked
Inactive Inactive Blanked
"
: 17 inches
: 0.25mm dotted with black matrix
: 90 degrees
17" V32 GS4 107E6-71K CMTR
TYPE :107E61/00
BRAND : PHILIPS
2004-06-11
Mains Voltage
90 - 264 VAC
Compliance
Requirement
Video
Active Mandatory
Blanked Mandatory
Mandatory
Mandatory
"
flat/square screen
: 56.1%(LG), 55%(HF), 50%(CPT),
: AGARAS
: By P-Mini-rim-band.
: 25.0 ± 1 KV (Ib=0)
: 325.1 mm x 243.8 mm
: LG, HF, CPT, SDI
8639 000 15582
31
590
Mains freq.
60 3 Hz
+/-
Power
</=75w
</=1 w
</= 1 w
</=1 w
13