Philips 107E61/00 Service Manual page 69

GENERAL PRODUCT SPECIFICATION
: 230 ± 3 mm
Height
Image centering deviation (For preset modes only)
4.3
With respect to fig. 2, the target relationships are the following :
|A- B| £ 5 mm
Note : This centering is adjustable by the end-user.
Picture shift control range (For preset modes only)
4.4
H-shift range : ± 10 mm min.
V-shift range : ± 10 mm min.
Picture tilt
4.5
With respect to Fig. 3, Tilt to be measured on extremes of center line from bezel
|A- B|
Geometrical distortions (For preset modes only)
4.6
It is acceptable that pincushion, trapezoid, rhomboid,
rotation and various waves distortions must remain within
the limits of tolerance as in Fig. 4,
where A = B = 2.0 mm.
C = D = 2.0 mm.
The waviness of any vertical or horizontal shall be less than 1.0 mm
over a 50 mm distance.
Image non-linearity (For preset modes only)
4.7
Apply cross-hatch pattern with
12 equal blocks along horizontal axis,
9 equal blocks along vertical axis. (see Fig. 1)
Overall:
Adjacent:
H. non-linearity =
V. non-linearity =
17" V32 GS4 107E6-71K CMTR
TYPE
BRAND : PHILIPS
2004-06-11
P.S.SU
|C- D| £ 5 mm
: £ 2 mm
£ 10 % (£ 12 % for < 45KHz modes)
£ 12 % (for preload modes)
£ 6 % (£ 8 % for < 45KHz modes)
£ 8 % (for preload modes)
Xmax. - Xmin
(Xmax + Xmin)/2
Ymax. - Ymin
(Ymax + Ymin)/2
:107E61/00
2004-06-11
x 100%
x 100%
8639 000 15582
16
31
590
69
107E6 CRT
Go to cover page