Philips 107E61/00 Service Manual page 18

18
107E6 CRT
Go to cover page
Step 2. Run EDID46 program.
1. Click , choose Run at start menu of Windows95/98 as
shown in Fig. 13.
2. At the submenu, type the path of EDID46
(For example, C:\107E6\EDID46.exe, as shown in Fig. 14).
C:\107T6\edid46.exe
OK
3. Click button. The main menu appears (as shown in Fig. 15).
This is for initialize alignment box.
Step 4. Connecting all cables and box as shown in Fig. 16.
ISP (In System Program)
Fig. 13
Fig. 14
Fig. 15
PC
DC Power
1
8-12V
Printer
Port
To PC Video Port (D-sub)
Note: Before you connect all the cables and box, you must
execute EDID46.exe (substeps 5 to 7) firstly, otherwise, after you
connected the alignment kits, the following warning message will
appear on the screen as shown in Fig. 17.
CHECK SIGNAL CABLE
Step 3. Load Hex file and input the bootcode.
1. Click , choose programs at start menu of Windows95/98 ,
find I2cHaI2c-Control Programs as shown in Fig. 8.
Programms
2. Click the ''I2cHaI2c-Control Programs'',bring up the below
window as shown in Fig. 9.
1=Power connector
2=D-SUB connector
1
2
To
Monitor
Fig. 16
To PC
Fig. 17
Fig. 8
Fig. 9