1. Manuals
  2. Brands
  3. Philips Manuals
  4. Monitor
  5. 107E50/05
  6. User manual

Philips 107E50/05 User Manual

3728
Hide thumbs
Table of Contents

Advertisement

Quick Links

electronic user's manual
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107E/manual.html7/15/2004 5:05:28 PM

Advertisement

Table of Contents
loading

Related Manuals for Philips 107E50/05

Summary of Contents for Philips 107E50/05

  • Page 1 electronic user's manual file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107E/manual.html7/15/2004 5:05:28 PM...
  • Page 2 Royal Philips Electronics - Global home http://www.philips.com/Default.asp7/15/2004 5:05:45 PM...

  • Page 3: Safety And Troubleshooting Information

    Safety & Troubleshooting Safety and Troubleshooting Information Safety Precautions and Maintenance Related Information Safety precautions and maintenance WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. Read and follow these instructions when connecting and using your computer monitor: Disconnect the monitor from the power supply if the monitor is not to be used for an extended period of time.
  • Page 4 Other Documents You May Need About This Guide This electronic user's guide is intended for anyone who uses the Philips Color Monitor. It describes the monitor's features, setup, operation and all other information, which is the same exact information described in our printed version.

  • Page 5: Notational Descriptions

    About This Electronic User's Manual Philips Color Monitor Quick Start Guide which summarizes the steps for setting up the monitor. This is included with this product. Notational Descriptions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type.
  • Page 6 About This Electronic User's Manual ©2003 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction, copying, usage, modifying, hiring, renting, public performance, transmission and/or broadcasting in whole or in part is prohibited without written consent of Philips Electronics N.V. file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107E/ABOUT/ABOUT.HTM (3 of 3)7/15/2004 5:05:46 PM...

  • Page 7: Product Information

    107E Product Information Product Information Product Features • Technical Specifications Specification • Pin Assignment Product Features Model Regulation 107E50 TCO'03 107E51 MPRII 107E56 MPRII 107E5 17-inch (16.0" VIS) color monitor with excellent front of screen performance for use with MACs and PCs Autoscan covers horizontal frequencies up to 70 kHz offering a maximum resolution of 1280 x 1024 with flicker free display of 1024 x 768 at up to 88 Hz Flat square High Contrast CRT with high-resolution 0.27 mm dot pitch (0.23 hdp).

  • Page 8: White Color Temperature

    107E Product Information • Size and deflection • Dot pitch • Horizontal pitch • Tube type • Phosphor • Recommended display area • Maximum display area SCANNING • Horizontal scanning • Vertical scanning VIDEO • Video dot rate • Input impedance - Video - Sync •...

  • Page 9: Automatic Powersaving

    Using a standard unified color space, sRGB will help represent pictures taken by an sRGB compatible device correctly on your sRGB enabled Philips monitors. In that way, the colors are calibrated and you can rely on the correctness of the colors shown on your screen.
  • Page 10 (Please refer to rating label) 0° to 40°C / 32° to 104°F -25° to +65°C / -13° to +149°F 5% to 95% Power Saving <1W ® PHILIPS artner, ® guidelines for energy efficiency. ° , full white pattern. LED color Green...
  • Page 11 107E Product Information Pin Assignment The 15-pin D-sub connector (male) of the signal cable (IBM systems): Assignment Red video input Green video input Blue video input Identical output - connected to pin 10 Ground Red video ground Green video ground Blue video ground Views file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107E/PRODUCT/PRODUCT.HTM (5 of 6)7/15/2004 5:05:48 PM...

  • Page 12: Front View

    107E Product Information Follow the links to see various views of the monitor and its components. Front View Rear View file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107E/PRODUCT/PRODUCT.HTM (6 of 6)7/15/2004 5:05:48 PM RETURN TO TOP OF THE PAGE...

  • Page 13: Installing Your Monitor

    Installing your Monitor Installing your Monitor Front View • Rear View • 6G3B11 Multimedia Base (option) Front View Power button switches your monitor on. OK button which when pressed will take you to the OSD controls Contrast hotkey. When the "-" button is pressed, the adjustment controls for the CONTRAST will show up.

  • Page 14: Rear View

    Installing your Monitor "-" and "+" buttons, are used for adjusting the OSD of your monitor. LightFrame™ hotkey. When the button is pressed, the high- brightness function of LightFrame™ will show up. Rear View file:///D|/EDFU/crt_17_5/edoc/ENGLISH/INSTALL_6/INSTALL.HTM (2 of 3)7/15/2004 5:05:48 PM RETURN TO TOP OF THE PAGE...
  • Page 15 Installing your Monitor 1. Power in - attach power cable here. 2. Video In - this is a cable which is already attached to your monitor. Connect the other end of the cable to your PC. file:///D|/EDFU/crt_17_5/edoc/ENGLISH/INSTALL_6/INSTALL.HTM (3 of 3)7/15/2004 5:05:48 PM RETURN TO TOP OF THE PAGE...

  • Page 16: Description Of The On-Screen Display

    Description of the On Screen Display What is the On-Screen Display? This is a feature in all Philips monitors which allows an end-user to adjust screen performance of monitors directly through an on-screen instruction window. The user interface provides user- friendliness and ease-of-use when operating the monitor.
  • Page 17 On-Screen Display The OSD Tree Below is an overall view of the structure of the On-Screen Display. You can use this as reference when you want to later on work your way around the different adjustments. Your monitor may not include all the items in the OSD tree shown below. file:///D|/EDFU/crt_17_5/edoc/ENGLISH/OSD_2/OSDDESC.HTM (2 of 4)7/15/2004 5:05:49 PM RETURN TO TOP OF THE PAGE...
  • Page 18 On-Screen Display RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17_5/edoc/ENGLISH/OSD_2/OSDDESC.HTM (3 of 4)7/15/2004 5:05:49 PM...
  • Page 19 On-Screen Display file:///D|/EDFU/crt_17_5/edoc/ENGLISH/OSD_2/OSDDESC.HTM (4 of 4)7/15/2004 5:05:49 PM...

  • Page 20: Customer Care And Warranty

    Customer Care and Warranty Customer Care & Warranty PLEASE SELECT YOUR COUNTRY/AREA TO READ THE WARRANTY COVERED: WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France • Germany • Greece • Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway • Portugal • Sweden • Switzerland •...

  • Page 21: Frequently Asked Questions

    Increasingly, monitors include USB hub functionality. But not all users need or want a USB hub. To give users freedom of choice, Philips provides an optional USB hub (type number PCUH411). The USB hub consists of two parts that are normally connected: one is functional, the other aesthetic. The aesthetic element is a removable cover.
  • Page 22 Frequently Asked Questions What models are Mac compatible? All listed Philips monitors are Mac compatible. BUT, you may need an adapter to connect the monitor to your Mac system. Please contact your dealer/reseller for details. What is TCO? TCO is a Swedish abbreviation for the Swedish Confederation of Professional Employees.
  • Page 23 Go to 'My Computer' and select 'Control Panel' followed by 'Monitor Control.' Select "All default selection' and choose your Philips monitor model from the default driver list. Plug and Play will automatically enable the EPA tick box for you. In DOS or Windows 3.1, you must first make sure your PC supports power saving.
  • Page 24 Frequently Asked Questions "Refresh rate" describes the number of times an entire screen is vertically scanned each second. In other words: If a monitor's refresh rate is 85 Hz, its screen is refreshed - or vertically scanned - 85 times per second.
  • Page 25 18. Why is LightFrame important to me? With LightFrame , selected Philips monitors deliver TV quality video and photo display while maintaining monitor performance for text-based applications. The result is that movies and other video are brighter and livelier;...
  • Page 26 Frequently Asked Questions 19. Will anyone else have this? LightFrame was invented, developed and patented by Philips. It is a unique feature that you will find exclusively in Philips monitors. 20. Will LightFrame shorten the life of a monitor? No. Extensive testing has confirmed LightFrame does not adversely affect monitor life. Today's state-of- the-art Philips monitors employ improved phosphors and are designed for high light output.
  • Page 27 25. What is Philips monitors' solution for audio? Not all users need multimedia capabilities. To give users freedom of choice, Philips provides an optional Multimedia Base (type number: 6G3B10). The Multimedia Base replaces the easily removable standard pedestal of the monitor.
  • Page 28 Only the monitor's height is increased by only 3 centimeters. 29. Where can I buy a multimedia base to incorporate with my Philips monitor? Please contact your dealer/reseller for details.
  • Page 29 Calibration should be performed after the monitor is warmed up. Auto Calibration takes place when a monitor receives a signal indicating an imminent switch to its sleep mode/stand-by mode. 34. Which models of Philips monitors are equipped with Auto Calibrate feature? file:///D|/EDFU/crt_17_5/edoc/ENGLISH/FAQ.HTM (9 of 14)7/15/2004 5:05:51 PM...
  • Page 30 Frequently Asked Questions Auto Calibrate is currently available in the new 201P, 201B and 109P. 35. The Main Menu displays OSD MAIN MENU LOCKED . Pressing the front control panels hasno effect. How can I unlock this function? Press and hold the OSD menu key for about 10 seconds until picture displays "OSD MAIN MENU UNLOCKED"...
  • Page 31 This is an intentional design and is an industry standard, not just for Philips monitors. Please be aware that not all models in the Philips range has this manual degauss function. Some models are built with an auto degauss feature which automatically degausses the monitor when it is switched on.
  • Page 32 Frequently Asked Questions 42. How do I adjust the picture on the screen? Please perform the following to correct the picture image: Reset your monitor via the OSD menu Adjust the Horz (width) and/or Vert size (height) in the OSD Change monitor timing to work at the recommended resolution 43.
  • Page 33 Frequently Asked Questions 45. I have noticed two thin horizontal lines on the screen of my Philips monitor. Is this normal? This phenomenon can occur with Philips 107P, 109P and 201P monitors and is normal. Your monitor is using an Aperture Grille, which consists of fine vertical wires to align the electron beams with the phosphors on the screen.
  • Page 34 50. Why does the picture disappear after I press the on/off button quickly? This is a unique Philips feature designed to preserve the life of your monitor. Please allow 5 seconds between powering off and on your monitor, your picture will then be restored.
  • Page 35 L M N O P Autoscan A microprocessor-based feature of Philips Brilliance monitors is able to detect automatically horizontal and vertical frequencies of input signals with those of the installed video card. An autoscan monitor can thus operate with a wide range of video cards. MultiSync, a registered trademark of NEC, provides a similar function.

  • Page 36: Color Temperature

    A way of describing the color of a radiating source in terms of the temperature (in degrees Kelvin) of a black body radiating with the same dominant frequency as the source. Most Philips monitors offer the possibility of setting the color temperature to any desired value. Contrast The ratio between the brightness of the brightest and darkest parts of a picture.
  • Page 37 Glossary a picture is set by the brightness of the unexcited phosphor, which is governed by the degree with which ambient light is reflected. Contrast is therefore reduced in conditions of high ambient light levels. Black Matrix tubes reflect less ambient light so exhibit higher contrast than other tubes. Convergence error Bean misalignment causing one or more of the three beams passing through the wrong aperture in the shadow mask and striking a phosphor dot in the wrong triad.
  • Page 38 TV and monitor picture tube. CustoMax Philips proprietary monitor control software that allows users to control parameters (e.g., Size, Color, Geometry) using software running in Windows. CustoMax is compatible with existing VGA cards.

  • Page 39: Digital Control

    This is a very advanced feature that allows the user to switch to any required mode at any instant without having to spend time readjusting the picture. It is currently available in most Philips monitors. Dot pitch The shortest distance between two phosphor dots of the same color on the screen.
  • Page 40 Glossary Dot rate Frequency in MHz of the dot clock. It is a measure of the speed with which data is transferred between the video card and subsequent processing circuitry. Also known as video dot rate. Electromagnetic radiation standards International standards set to limit electromagnetic emissions from monitors. There are currently file:///D|/EDFU/crt_17_5/edoc/ENGLISH/GLOSSARY/GLOSSARY.HTM (6 of 22)7/15/2004 5:05:54 PM RETURN TO TOP OF THE PAGE...
  • Page 41 Glossary two important standards both derived from regulations originally laid down by Swedish authorities. MPR-II The standard originally proposed by the Swedish National Board of Measurement and Testing. It set maximum levels of electromagnetic radiation emitted by monitors, and has now been adopted as a world standard.
  • Page 42 Glossary problem can, however, be eliminated by increasing the refresh rate (number of frames/second) of the monitor to a value above around 70 Hz. Sensitivity to flicker appears to diminish with increasing age. Hertz The unit of frequency named after the physicist Heinrich Hertz (1857-1894). 1 hertz (Hz) is equal to 1 cycle/second.
  • Page 43 Glossary INF file (Information File) Information (INF) files store information in a specific format. The set-up functions retrieve information from the INF file to use when performing installation operations. Examples of the type of information stored in an INF file include INI and registry changes, file names, and locations of the source files on source media.

  • Page 44: Line Frequency

    Glossary Linearity The degree to measure the actual location of a pixel on the screen corresponds with its intended location. ( see figure ) Line frequency See Horizontal scanning frequency. Low-emission monitor A monitor that complies with international standards on radiation. See Electromagnetic radiation standards.
  • Page 45 Glossary Alternating fields generated by the deflection yoke. These are subject to increasing attention, notably by governing authorities, the trade and the press. Although there is no scientific evidence that monitor emissions are harmful, much effort has gone into reducing emissions on the principle of better safe than sorry.
  • Page 46 Glossary Non-interlaced See Interlaced/non-interlaced. OSD (On Screen Display) The feature that allows an end user to adjust screen performance and parameters of monitors directly through an on-screen instruction window. See CustoMax in CrystalClear section. Overscan The practice in which areas without useful video information are scanned outside the visible screen area in order to make maximum use of the screen for display of active video information.
  • Page 47 Glossary Parallelogram Distortion See Geometric distortion. Phosphor Generic name for the class of substances that exhibit luminescence. To produce a picture on screen, phosphors are deposited on the inner surface of the picture-tube screen and excited into luminescence by the electron beam. Typical examples of phosphors are P22 medium short- persistence phosphor and EBU high-color-saturation phosphor.
  • Page 48 Glossary Plug-and-Play See DDC. See USB section. Raster The area on screen that electron beam can reach. Refresh rate See Vertical scanning frequency. Resolution The number of pixels that can be displayed on the screen. The resolution is specified as the number of pixels in a line multiplied by the number of horizontal lines.
  • Page 49 Glossary Screen coatings Anti-Static coatings Due to bombardment by beam electrons, monitor screens become electrically charged when in use. Electrically charged screens surfaces can attract dust particles. An Anti-Static coating is a conductive coating deposited on the screen (or on a glass panel immediately in front of the screen) that conducts away the charge and prevents screen dust build-up.

  • Page 50: Self-Test Function

    Glossary ARAS is one of the most effective anti-reflection/anti-static screen treatments currently available. It is composed of a multi-layer structure of transparent dielectric material that suppresses specular reflections by broadband interference effects at the screen surface. Anti-static properties are provided by a single conductive layer within the multi-layer structure. With ARAS, the intensity of reflected light is reduced from around 4.5% of the incident light (the reflectivity of uncoated screens) to less than 0.5%.
  • Page 51 Glossary common: SOG (Synchronization On Green) A properly functioning color monitor requires five kinds of signals: horizontal sync pulse, vertical sync pulse, red color signal, green color signal and blue color signal. Signals from a PC are transmitted to a monitor using one of three methods: 1.

  • Page 52: Tilt Function

    Glossary See Electromagnetic radiation standards. Tilt function See rotation function. Trapezoid distortion See Geometrical distortion. TTL signal A TTL (Transistor-transistor-logic) signal is a digital signal level for controlling the screen colors. With TTL driving, the red, green and blue signals can only be switched on or off or provided with an intensity signal.
  • Page 53 Glossary USB eliminates "case angst" -- the fear of removing the computer case to install add-on peripherals. And USB also eliminates adjustment of complicated IRQ settings when installing new peripherals. USB does away with "port gridlock." Without USB, PCs are normally limited to one printer, two Com port devices (usually a mouse and modem), one Enhanced Parallel Port add-on (scanner or video camera, for example) and a joystick.
  • Page 54 Glossary for example, a data/FAX modem device. Devices may be physical, electrical, addressable, and logical. Downstream The direction of data flow from the host or away from the host. A downstream port is the port on a hub electrically farthest from the host that generates downstream data traffic from the hub. Downstream ports receive upstream data traffic.
  • Page 55 Glossary Vertical dot pitch See Dot pitch. Vertical scanning frequency Expressed in Hz, this is the number of fields written to the screen every second in interlaced mode. In non-interlaced mode vertical scanning frequency is the number of frames (complete pictures) written to the screen every second (also known as refresh rate).
  • Page 56 Glossary A card equipped with a character or graphic generator and video memory, which maps to the screen. A microprocessor scans video memory and translates bit information from the computer into displayable video signals for the monitor. These cards comply with various standards that determine the nature and quality of the display.

  • Page 57: Download And Print

    Download and Print Download and Print This page provides an option to read the manual in .pdf format. PDF files can be downloaded into your hard disk, then viewed and printed with Acrobat Reader or through your browser. If you do not have Adobe® Acrobat Reader installed, click on the link to install the application. Adobe®...
  • Page 58 Download and Print 107P.pdf 107S.pdf 107T.pdf 107X.pdf file:///D|/EDFU/crt_17_5/edoc/ENGLISH/DOWNLOAD/DOWNLOAD.HTM (2 of 2)7/15/2004 5:05:55 PM...

  • Page 59: Troubleshooting

    Troubleshooting Troubleshooting Safety Precautions and Maintenance Related Information Common Problems Having trouble? Something not working? Before calling for help, try these suggestions. Having this problem? No Picture (Power LED not lit) No Picture (Power LED is flashing green) No Picture (Power LED is green) Screen doesn't show when you turn on the...
  • Page 60 Troubleshooting No color or intermittent color Color appears blotchy Missing one or more colors Dim Picture Picture is too large or too small. Edges of the picture are not square. Picture has a double image. Picture is not sharp. Unstable Picture Problem with On Screen Display file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107E/SAFETY/saf_troub.htm (2 of 3)7/15/2004 5:29:59 PM...
  • Page 61 Troubleshooting For further assistance, refer to the distributor. file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107E/SAFETY/saf_troub.htm (3 of 3)7/15/2004 5:29:59 PM Consumer Information Centers RETURN TO TOP OF THE PAGE list to contact your local Philips...

  • Page 62: Regulatory Information

    EN 55022 Compliance (Czech Republic • MIC Notice (South Korea Only) • North Europe Information (Nordic Countries) • Troubleshooting • Other Related Information TCO '03 Information • Energy Star • Commission • Polish Center • BSMI • Philips End-of-Life Disposal...
  • Page 63 Regulatory Information There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments. Since all methods of electricity generation have a negative effect on the environment (e.g. acidic and climate-influencing emissions, radioactive waste), it is vital to save energy.

  • Page 64: Flame Retardants

    Regulatory Information Environmental Requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances.
  • Page 65 Regulatory Information manufacture and assembly of the product. CFCs (freons) are sometimes used for washing printed circuit boards. CFCs break down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on earth of ultraviolet light with increased risks e.g. skin cancer (malignant melanoma) as a consequence.
  • Page 66 Regulatory Information Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability. Energy Energy-saving mode after a certain time-beneficial both for the user and the environment Electrical safety Emissions Electromagnetic fields...
  • Page 67 Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take-back initiatives and recycling programs whenever possible, preferably in cooperation with competitors.
  • Page 68 Regulatory Information CE Declaration of Conformity Philips Consumer Electronics declare under our responsibility that the product is in conformity with the following standards - EN60950:2000 (Safety requirement of Information Technology Equipment) - EN55022:1998 (Radio Disturbance requirement of Information Technology Equipment)

  • Page 69: Federal Communications Commission (Fcc) Notice (U.s. Only)

    Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107E/SAFETY/regs/regulat.htm (8 of 17)7/15/2004 5:30:02 PM LED Indicator Green Flashing Green ® PHILIPS artner, ® NERGY guidelines for energy efficiency. RETURN TO TOP OF THE PAGE Power Consumption Typical 64W <...
  • Page 70 Regulatory Information Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

  • Page 71: Vcci Notice (Japan Only)

    Regulatory Information Toutes modifications n'ayant pas reçu l'approbation des services compétents en matière de conformité est susceptible d'interdire à l'utilisateur l'usage du présent équipement. N'utiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques. CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA.

  • Page 72: Class B Ite

    Regulatory Information Class B ITE MIC Notice (South Korea Only) Class B Device Please note that this device has been approved for non-business purposes and may be used in any environment, including residential areas. file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107E/SAFETY/regs/regulat.htm (11 of 17)7/15/2004 5:30:02 PM RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...

  • Page 73: Polish Center For Testing And Certification Notice

    Regulatory Information Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source. The phasing conductor of the room's electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A).
  • Page 74 Regulatory Information North Europe Information (Nordic Countries) Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ...
  • Page 75 Regulatory Information BSMI Notice (Taiwan Only) Ergonomie Hinweis (nur Deutschland) Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch Röntgenstrahlen" festgelegten Vorschriften. Auf der Rückwand des Gerätes befindet sich ein Aufkleber, der auf die Unbedenklichkeit der Inbetriebnahme hinweist, da die Vorschriften über die Bauart von Störstrahlern nach Anlage III ¤...

  • Page 76: Warning! This Appliance Must Be Earthed

    Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal regulations.
  • Page 77 Regulatory Information file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107E/SAFETY/regs/regulat.htm (16 of 17)7/15/2004 5:30:02 PM If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3- pin plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5A.
  • Page 78 Regulatory Information file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107E/SAFETY/regs/regulat.htm (17 of 17)7/15/2004 5:30:02 PM that the cord grip is clamped over the sheath of the lead - not simply over the three wires. RETURN TO TOP OF THE PAGE...

  • Page 79: Other Related Information

    Other Related Information Other Related Information Safety Precautions and Maintenance Information for Users in the U. Information for Users in the U. S. For units set at 115 V : Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductor cord a maximum of 15-feet long and a parallel blade, grounding type attachment plug rated 15 A, 125 V.
  • Page 80 6G3B11 Multimedia Base (option) 6G3B11 Multimedia Base (option) Front View • Rear View • Technical Specifications Multimedia Base • Power adapter Installation Technical Specifications* • Output power • Bass Boost • Headphone connection • Microphone in/out • Includes • Dimension •...
  • Page 81 6G3B11 Multimedia Base (option) Installing your Multimedia Pedestal file:///D|/EDFU/crt_17_5/edoc/ENGLISH/INSTALL_6/mm_pede/mm_inst.htm (2 of 5)7/15/2004 5:30:21 PM Attach your headphones here. The loudspeakers will automatically switch off once headphones are connected. Attach your microphone here. Connect this to the audio output of your PC. Connect this to the microphone output of your PC.
  • Page 82 6G3B11 Multimedia Base (option) Power adapter Installation Installing the adapter There are two (2) ways of installing the adapter A. T-connector B. Wall more connector Monitor file:///D|/EDFU/crt_17_5/edoc/ENGLISH/INSTALL_6/mm_pede/mm_inst.htm (3 of 5)7/15/2004 5:30:21 PM 1. To INSTALL Slide the pedestal, aligning with the holes on the side.
  • Page 83 6G3B11 Multimedia Base (option) Multimedia Base DC input Note: Please keep least 50 cm ) to avoid cansing unstable monitor picture. file:///D|/EDFU/crt_17_5/edoc/ENGLISH/INSTALL_6/mm_pede/mm_inst.htm (4 of 5)7/15/2004 5:30:21 PM PC power cord. Transformer Power outlet transformer away from monitor as far as possible ( at...
  • Page 84 6G3B11 Multimedia Base (option) RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17_5/edoc/ENGLISH/INSTALL_6/mm_pede/mm_inst.htm (5 of 5)7/15/2004 5:30:21 PM...
  • Page 85 The OSD Controls The OSD Controls Description of the On-Screen Display The OSD Controls : Brightness (HotKey) Horizontal • Adjust Vertical Controls • Close Main Controls BRIGHTNESS To adjust your screen's brightness, follow the steps below. Brightness is the overall intensity of the light coming from the screen.
  • Page 86 The OSD Controls To adjust your screen's contrast, follow the steps bellow. Contrast is the difference between the light and dark areas on the screen. A 100% contrast is recommended. 1) Press the button on the monitor. The CONTRAST window appears. 2) Press the button to adjust the contrast.
  • Page 87 The OSD Controls 3) Press the button until the desired language is highlighted. 4) Press the button to confirm your selection and return to MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. ZOOM file:///D|/EDFU/crt_17_5/edoc/ENGLISH/OSD_2/osd_cont.htm (3 of 24)7/15/2004 5:30:30 PM RETURN TO TOP OF THE PAGE...
  • Page 88 The OSD Controls ZOOM increases or decreases the size of the images on your screen. To adjust the ZOOM follow the steps below. 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until ZOOM is highlighted. 3) Press the button.
  • Page 89 The OSD Controls CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. ADJUST HORIZONTAL ADJUST POSITION under ADJUST HORIZONTAL shifts the image on your screen either to the left or right. Use this feature if your image does not appear centered. ADJUST SIZE under ADJUST HORIZONTAL expands or controls the image on your screen, pushing it out toward the left and right sides or pulling it in toward the center.
  • Page 90 The OSD Controls 4) Press the button to move the image to the left or right. 5) When the position is adjusted, press the press to confirm. 6) To adjust the horizontal size, press the 7) When the size is adjusted, press the CNTROLS sindow.
  • Page 91 The OSD Controls ADJUST VERTICAL ADJUST POSITION under ADJUST VERTICAL shifts the image on your screen either up or down. Use this feature if your image does not appear centered. ADJUST SIZE under ADJUST VERTICAL expands or controls the image on your screen, pushing it out toward the top or bottom or pulling it in toward the center.
  • Page 92 The OSD Controls 4) Press the button to move the image up or down. 5) When the position is adjusted, press the CONTROLS window, or press the 6) To adjust the vertical size, press the 7) When the size is adjusted, press the CONTROLS window.
  • Page 93 The OSD Controls ADJUST SHAPE ADJUST SIDE CURVE ADJUST SIDE CURVE under ADJUST SHAPE allows you to adjust two of the five preset options. These two options are PINCUSHION and BALANCED pincushion. Note: use these features only when the picture is not square. 1) Press the button on the monitor.
  • Page 94 The OSD Controls 4) Press the button. The SIDE CURVE window appears. PINCUSHION should be highlighted. Press to confirm. 5) To adjust the pincushion, press the 6) When the pincushion is adjusted, press the confirm. file:///D|/EDFU/crt_17_5/edoc/ENGLISH/OSD_2/osd_cont.htm (10 of 24)7/15/2004 5:30:30 PM button,press the button to highlight BALANCED.
  • Page 95 The OSD Controls 7) To adjust the balanced pincushion, press the 8) When the balanced pincushion is adjusted, press the SHAPE window. BACK TO MAIN WINDOWS will be highlighted. 9) Press the button to return to the MAIN CONTROLS window, or press the ADJUST SIDE ANGLES is highlighted.
  • Page 96 The OSD Controls 3) Press the button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be highlighted. 4) Press the button to highlight ADJUST SIDE ANGLES. 5) Press the button. The SIDE ANGLES window appears. TRAPEZOID should be highlighted, press to confirm.
  • Page 97 The OSD Controls 6) To adjust the trapezoid, press the 7) When the trapezoid is adjusted, press the PARALLELOGRAM, press 8) To adjust the parallelogram, highlight parallelogram then button to adjust.. 9) When the parallelogram is adjusted, press the the ADJUST SHAPE window. BACK TO MAIN WINDOWS will be highlighted. 10) Press the button to return to the MAIN CONTROLS window, or press the file:///D|/EDFU/crt_17_5/edoc/ENGLISH/OSD_2/osd_cont.htm (13 of 24)7/15/2004 5:30:30 PM...
  • Page 98 The OSD Controls ROTATE IMAGE is highlighted. ROTATE IMAGE (Not available in all models) ROTATE IMAGE under ADJUST SHAPE allows you to adjust one of the five preset options. These two options are PINCUSHION and BALANCED pincushion. Note: use this feature only when the picture is not square.

  • Page 99: Adjust Color

    The OSD Controls 5) Press the button. The ROTATE IMAGE window appears. ROTATE should be highlighted. 6) To adjust the rotation, press the 7) When the rotation is adjusted, press the ADJUST SHAPE window. BACK TO MAIN CONTROLS should be highlighted. 8) Press the button to return to MAIN CONTROLS.
  • Page 100 The OSD Controls Wide Web, and playing video games. The third option is for PHOTO RETOUCH, which is for working with pictures you have imported into your computer and want to alter. When you select one of these options, the monitor automatically adjusts itself to that option. There is also a fourth option, USER PRESET, which allows you to adjust the colors on your screen to a setting you desire.
  • Page 101 The OSD Controls 4) Press the button to highlight 9300K for GENERAL USE, 6500K for IMAGE MANAGEMENT, 5500K for PHOTO RETOUCH, or USER PRESET. 5) Once you have highlighted GENERAL USE, IMAGE MANAGEMENT, or PHOTO RETOUCH, press the button to confirm you selection. Press window.

  • Page 102: Reset To Factory Settings

    The OSD Controls 6b) When finished with RED, press press to confirm.Next, press the 6c) When finished GREEN, press to confirm. Next, press the 6d) When all adjustments are complete, press the return to the MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. RESET TO FACTORY SETTINGS RESET TO FACTORY SETTINGS returns everything in all the windows to factory presets.
  • Page 103 The OSD Controls 3) Press the button. The RESET TO FACTORY SETTINGS window appears. 4) Press the button to select YES or NO. NO is the default. YES returns all settings to their original factory adjustments. 5) Press the button to confirm your selection and press CONTROLS window.
  • Page 104 The OSD Controls EXTRA CONTROLS DEGAUSS EXTRA CONTROLS is a set of three features, including DEGAUSS. Degaussing removes electromagnetic build up that may distort the color on your screen. 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until EXTRA CONTROLS is highlighted.
  • Page 105 The OSD Controls 5) To degauss your screen, press the CONTROLS window will reappear. CLOSE MAIN CONTROLS will be highlighted. ADJUST MOIRE (Not available in all models) EXTRA CONTROLS is a set of three features, including ADJUST MOIRE. Moire is a fringe pattern arising from the interference between two superimposed line patterns.
  • Page 106 The OSD Controls 3) Press the button. The EXTRA CONTROLS window appears. ADJUST MOIRE will be highlighted. 4) Press the button. The ADJUST MOIRE window appears. HORIZONTAL will be highlighted, file:///D|/EDFU/crt_17_5/edoc/ENGLISH/OSD_2/osd_cont.htm (22 of 24)7/15/2004 5:30:30 PM...
  • Page 107 The OSD Controls press to confirm. 5) To adjust the horizontal moire, press the 6) When the horizontal moire is adjusted, press VERTICAL. 7) To adjust the vertical moire, press 8) When the vertical moire is adjusted, press the the EXTRA CONTROLS window. BACK TO MAIN CONTROLS will be highlighted. file:///D|/EDFU/crt_17_5/edoc/ENGLISH/OSD_2/osd_cont.htm (23 of 24)7/15/2004 5:30:30 PM button.
  • Page 108 The OSD Controls CLOSE MAIN CONTROLS RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17_5/edoc/ENGLISH/OSD_2/osd_cont.htm (24 of 24)7/15/2004 5:30:30 PM...

  • Page 109: Your International Guarantee

    In the event you require service whilst in another country a dealer address can be given to you by the Philips Consumer Help Desk in that country, the telephone and fax number of which can be found in the relevant part of this booklet.
  • Page 110 International Guarantee http://www.philips.com Website: file:///D|/EDFU/crt_17_5/edoc/ENGLISH/WARRANTY/war_intl.htm (2 of 2)7/15/2004 5:30:34 PM...

  • Page 111: Who Is Covered

    Philips F1rst Choice Warranty Thank you for purchasing this Philips monitor. All Philips monitors are designed and manufactured to high standards and deliver high-quality performance, ease of use and ease of installation. Should you encounter any difficulties while installing or using this product, please contact Philips directly to benefit from your Philips F1rst Choice Warranty.

  • Page 112: What Is Excluded

    Where IS SERVICE AVAILABLE? Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics. In countries where Philips Consumer Electronics does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available).
  • Page 113 Please contact Philips at: (800) 479-6696 Three years free parts and three years free labor will be provided at Philips Canada depot or any one of its authorized service centers. (In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose.
  • Page 114 United States Guarantee This warranty gives you specific legal rights. You may have other rights which vary from state/ province to state/province. Before contacting Philips, please prepare the following details so we can solve your problem quickly. Philips type number...

  • Page 115: Consumer Information Centers

    Consumer Information Centers Consumer Information Centers Antilles • Argentina • Australia Czech Republic • Dubai • Egypt India• Indonesia • Japan • Paraguay • Peru • Philippines Thailand • Turkey • Uruguay Eastern Europe CZECH REPUBLIC Xpectrum Lužná 591/4 CZ - 160 00 Praha 6 Tel: 800 100 697 Email:info@xpectrum.cz www.xpectrum.cz...
  • Page 116 Türk Philips Ticaret A.S. Yukari Dudullu Org.San.Bolgesi 2.Cadde No:22 34776-Umraniye/Istanbul Tel: (0800)-261 33 02 Latin America ANTILLES Philips Antillana N.V.Kaminda A.J.E. Kusters 4 Zeelandia, P.O. box 3523-3051 Willemstad, Curacao Phone: (09)-4612799 Fax : (09)-4612772 file:///D|/EDFU/crt_17_5/edoc/ENGLISH/WARRANTY/warcic.htm (2 of 12)7/15/2004 5:30:50 PM...
  • Page 117 Consumer Information Centers ARGENTINA Vedia 3892 Capital Federal CP:1430 Buenos Aires Phone: (011)-4544 2047 Fax: (011)-4544 2928 BRASIL Philips da Amazonia Ind. Elet.Ltda. Av.Luis Carlos Berrini, 1400-Sao Paulo-SP Phone: 0800-7010-203 CHILE Philips Chilena S.A. Avenida Santa Maria 0760 P.O. box 2687Santiago de Chile...
  • Page 118 Consumer Information Centers PARAGUAY Philips del Paraguay S.A. Avenida Artigas 1513 Casilla de Correos 605 Asuncion Phone: (021)-211666 Fax : (021)-213007 PERU Philips Peruana S.A. Customer Desk Comandante Espinar 719 Casilla 1841 Limab18 Phone: (01)-2136200 Fax : (01)-2136276 URUGUAY Ind.Philips del Uruguay S.A.
  • Page 119 3 Figtree Drive Homebush Bay NSW 2140 Phone: CIC:1300 363 391, PCE Service:1 300-361 392 Fax:+61 2 9947 0063 NEW ZEALAND Philips New Zealand Ltd. Consumer Help Desk 2 Wagener Place, Mt.Albert P.O. box 1041 Auckland Phone: 0800 477 999 (Toll Free)
  • Page 120 Consumer Information Centers CHINA SHANHAI No. 1102 wuding road, jing an district, 200040 Shanghai, P.R. China Phone: 800 820 5128 (Toll Free) Fax:21-65610647 NANJING No. 12-2 dong da ying bei, zhu jiang road, 210018 Nanjing, P.R. China Phone: 800 820 5128 (Toll Free) Fax:21-65610647 HANGZHOU No.
  • Page 121 Yi huan road, 410061 Chengdu, P.R. China Phone: 800 820 5128 (Toll Free) Fax:21-65610647 HONG KONG Philips Hong Kong Limited Consumer Information Centre 16/F Hopewell Centre 17 Kennedy Road, WANCHAI Phone: 2619-9663 Fax: 2481 5847 file:///D|/EDFU/crt_17_5/edoc/ENGLISH/WARRANTY/warcic.htm (7 of 12)7/15/2004 5:30:50 PM...
  • Page 122 68, Shivaji Marg New Dehli 110 015 Phone: (020)-712 2048 ext 2765 Fax: (020)-712 1558 INDONESIA Philips Group of Companies in Indonesia Consumer Information Centre Jl.Buncit Raya Kav. 99-100 12510 Jakarta Phone: (021)-7940040 7984255 Ext 1612 Fax : (021)-7947511 / 7947539...
  • Page 123 46200 Petaling Jaya, Selagor. P.O.box 12163 50768 Kuala Lumpur. Phone: (03)-7950 5501/02 Fax:(03)-7954 8504 PAKISTAN KARACHI Philips Electrical Ind. of Pakistan Consumer Information Centre F-54, S.I.T.E, P.O.Box 7101 75730 KARACHI Phone: (021)-773 1927 Fax:(021)-772 1167 Philips Consumer Service Centre 168-F, Adamjee Road...
  • Page 124 Fax:(021)-772 1167 PHILIPPINES Philips Electronics and Lighting Inc. 106 Valero St., Salcedo Village Makati, Metro Manilla. Phone: (02)-888 0572 , Domestic Toll Free:1-800-10-PHILIPS or 1-800-10-744 5477 Fax:(02)-888 0571 SINGAPORE Philips Singapore Private Ltd. Consumer Service Dept. Lorong 1,Toa Payoh., P.O. box 340...
  • Page 125 S.V. Div. 195 Main R.D. Martindale., Johannesburg P.O.box 58088 Newville 2114 Phone: (011)-4715000 Fax : (011)-4715020 Middle East DUBAI Philips Middle East B.V. Consumer Information Centre P.O.Box 7785 DUBAI Phone: (04)-3353666 Fax : (04)-3353999 EGYPT Philips Egypt Consumer Information Centre 10, Abdel Rahman El Rafei Mohandessin - Cairo, P.O.Box 242...
  • Page 126 Consumer Information Centers file:///D|/EDFU/crt_17_5/edoc/ENGLISH/WARRANTY/warcic.htm (12 of 12)7/15/2004 5:30:50 PM...

  • Page 127: Protect Your Investment

    Year Mail This Card Today To Get The Most From Your Purchase! ❏ No, I do not want to receive personalized offers about Philips products or other information from Philips in the future. 3135 015 07803 WARRANTY VERIFICATION OWNER CONFIRMATION MODEL REGISTRATION w w w .

  • Page 128: Warranty Registration Card

    PHILIPS Warranty Card 8/16/02 12:38 PM Page 2 !1375415338! 13754-1533 DEPOSIT 1533 Promptly! Open Please MATERIAL TIME-DATED STAMP CLASS FIRST APPLY PLEASE IMPORTANT Warranty Registration Card RETURN THE ATTACHED CARD WITHIN TEN DAYS TO ENSURE YOUR: ✓ Warranty Verification ✓ Owner Confirmation See Inside For ✓...

This manual is also suitable for:

107e50107e51107e56107e56 - 17" crt display107e56/99107e51/99 ... Show all

Table of Contents