Expresscard Assembly - HP PAVILION DV2700 Maintenance And Service Manual

Remove the connector frame (2) from the base enclosure.
2.
Remove the power connector (1) from the connector frame.
3.
Remove the modem connector (2) from the connector frame.
4.
Reverse this procedure to install the power connector cable and modem cable.

ExpressCard assembly

Description
ExpressCard assembly
Before removing the ExpressCard assembly, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Spare part number
417112-001
Component replacement procedures 109