HP PAVILION DV2700 Maintenance And Service Manual page 124

Before removing the processor, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Optical drive (see
b.
Keyboard (see
c.
Switch cover (see
d.
Display assembly (see
e.
Top cover (see
f.
System board (see
g.
Fan/heat sink assembly (see
h.
Remove the processor:
Turn the processor locking screw (1) one-half turn counterclockwise until you hear a click.
1.
Lift the processor (2) straight up and remove it.
2.
NOTE:
on the processor socket when you install the processor.
Reverse this procedure to install the processor.
116 Chapter 4 Removal and replacement procedures
Battery on page
Hard drive on page
Optical drive on page
Keyboard on page
Switch cover on page
Display assembly on page
Top cover on page
System board on page
The gold triangle (3) on the processor must be aligned with the triangle icon (4) embossed
56).
61)
73)
74)
79)
82)
87)
106)
Fan/heat sink assembly on page 112)