Security menu
Select
Administrator password
Power-On Password
System Configuration menu
Select
Language Support
Enhanced SATA support (select models only)
Boot Options
Button Sound (select models only)
Dedicated Video Memory*
Virtualization Technology*
Processor C4 State
*Available for AMD processors.
Diagnostics menu
Select
Hard Disk Self Test
120 Chapter 5 Setup Utility
To do this
Enter, change, or delete an administrator password.
Enter, change, or delete a power-on password.
To do this
Change the Setup Utility language.
Enable/disable enhanced SATA mode.
Set the following boot options:
f10
and
f12
Delay (sec.)―Set the delay for the
●
functions of the Setup Utility in intervals of 5 seconds each (0, 5,
10, 15, 20).
CD-ROM boot―Enable/disable boot from CD-ROM.
●
Floppy boot―Enable/disable boot from Floppy.
●
Internal Network Adapter boot―Enable/disable boot from
●
Internal Network Adapter.
Boot Order―Set the boot order for:
●
USB Floppy
◦
ATAPI CD/DVD ROM Drive
◦
Hard drive
◦
USB Diskette on Key
◦
USB Hard drive
◦
Network adapter
◦
Enable/disable the Quick Launch Button tapping sound.
Select amount of dedicated video memory.
Enable/disable the processor Virtualization Technology.
Enable/disable the processor C4 sleep state.
To do this
Run a comprehensive self-test on the hard drive.
NOTE:
On models with two hard drives, this menu option is called
the Primary Hard Disk Self Test.
f10
and
f12