Disconnect the camera module cable (3) from the camera module.
9.
Turn the camera module assembly upside down.
10.
Remove the two Phillips PM2.0×3.0 screws (1) that secure the camera module to the camera module
11.
bracket.
Remove the camera module (2) from the bracket.
12.
Reverse this procedure to install the camera module.
Display inverter
If it has been determined that the display inverter is the component that must be replaced to complete the
computer repair, the display assembly does not have to be removed. Follow the procedures in this section
to replace the display inverter. For information on replacing the display assembly and other display
assembly internal components, see
Description
Display inverter (includes 2-sided tape)
Display assembly on page
82.
Spare part number
417097-001
Component replacement procedures
59