4.
Remove the Fingerprint reader board and cable (3) from the top cover.
Reverse this procedure to install the Fingerprint reader board assembly.
ExpressCard assembly
Description
ExpressCard assembly
Before removing the ExpressCard assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
d.
Modem module (see
104
Chapter 4 Removal and replacement procedures
Downloaded from LpManual.com Manuals
Battery on page
50).
Hard drive on page
60)
Optical drive on page
Keyboard on page
66)
Modem module on page
57)
72)
Spare part number
639479-001