Xerox Travel Scanner 150 User Manual page 63

Note: Using the Configure Before Scan option to scan multiple pages does not apply for page formats BMP and JPG.
Please make sure the page format on the One Touch Properties window is set to TIFF, PDF, or one of the Text
formats. Make sure the option Create single image files is not selected. Please see page 58 for instructions on
changing the file settings.
1. Put a document in the paper feed slot on the scanner.
2. When the TWAIN Interface opens, select the appropriate scan settings for your document.
3. Click the Scan button on the TWAIN Interface.
4. After the Scanning Progress bar closes, place the next page in the paper feed slot on the scanner.
5. Continue until you have scanned all the pages in your multi-page document.
6. When you're finished scanning, click the Done button on the TWAIN Interface.
7. All the scanned pages will be sent to the Destination Application set in the One Touch Properties window. If the
Destination Application is PaperPort, the pages will be grouped as a single stack of pages.
Canceling a Configure Before Scan
Click Cancel in the scanning progress window.
1.
2. The following window will open asking if you want to cancel the entire job.
– Yes—scanning stops and all pages scanned in this batch, up to this point, will be deleted. The TWAIN
interface will close and you can restart your scan from the beginning.
Choose Yes if the TWAIN scan settings are incorrect for your current scanning batch.
For instance, the Picture Type is Black & White but you want to scan your documents in color. Choose Yes
to delete any scanned pages, then start over but select the correct picture type before scanning.
– No—scanning stops, but all pages scanned in this batch, up to this point, are not deleted and the TWAIN
interface remains open. You can place a new page in the scanner, adjust the TWAIN settings for it, then
click the Scan button in the TWAIN interface to continue scanning. At the end of the scanning batch, all
pages from the first portion of the scan and second will be sent to the Destination Application.
Choose this option if, for instance, you have been scanning a Black & White document but you want to
insert a color page into it. Instead of having to re-scan the entire batch, you can stop the current scan,
change the picture type from Black & White to Color, then restart the scanning without losing the pages
already scanned.
Xerox Travel Scanner 150
User's Guide
63