Using The Memory Function - Omron R3-1 Plus Instruction Manual

3.Using the Unit
3.4

Using the Memory Function

This unit has a memory capable of storing 60 sets of readings.
Every time you complete the measurement, the unit
automatically stores blood pressure and pulse rate.
If there are three readings within 10 minutes of the last reading,
the average of the three readings is displayed. (If there are only
two readings in memory for that period, the average will be
based on two readings. If there is one reading in memory for that
period, the average will be based on one reading.)
Note: When 60 sets of readings are stored in memory, the
oldest set will be deleted to store a new set.
To View the Average Value
Press the MEM button.
If there are no measurements results
stored in memory, the screen to the
right is displayed.
20
Systolic blood pressure
Diastolic blood pressure
Pulse