Setting The Date And Time - Omron R3-1 Plus Instruction Manual

2.Preparation
2.2

Setting the Date and Time

Your blood pressure monitor automatically stores up to 60
measurement values in its memory and calculates an average
value based on the three most recent measurements taken
within 10 minutes of the last reading. (If there are only two
readings in memory for that period, the average will be based on
two readings. If there is one reading in memory for that period,
the average will be based on one reading.) To make use of the
memory and average value function:
• Set the unit to the correct date and time before taking a
measurement for the first time.
• If the batteries have been removed, the date and time setting
will need to be reset.
• When the batteries are installed and the unit is turned on for
the first time, the year digits (2005) will flash on the display.
• The range for the year setting is 2005 to 2030. If the year
reaches 2030, it will return to 2005.
1.
To set or reset the date and time, press the SET button.
2.
Press the MEM button to
advance the digits one at a
time.
Note: If you hold down the
MEM button, the digits
will advance rapidly.
3.
Press the SET button to confirm the setting when the
desired number appears on the display.
The year setting is set and the month digits will flash.
10
2
3