Figure 2-14. Removing The Bios Ic - HP OmniBook 900 Service Manual

Reassembly Notes
Caution
Align the IC with the slot in the socket. The IC is keyed to fit correctly. If you insert the IC
backward, the IC or motherboard could be damaged.
Press down firmly on the IC with your thumb to ensure a proper connection.
Fold the keyboard back into place. Slip its front tabs into the slots, then snap the back edge into
place.
Push the keyboard toward the back as you tighten the two screws. This helps engage the tab at the
back-center of the keyboard.
Reprogram the IC by programming the BIOS—see the note above.
HP OmniBook 900

Figure 2-14. Removing the BIOS IC

IC removal tool
Removal and Replacement 2-25