IP Camera Web Client
Audio Settings
82
When Alarm Input is set to Normally Closed
When Alarm Input is set to Normally Closed, the camera is normally in Day mode if the
camera alarm input connection is closed (shorted).
•
The IR-cut filter will be off (removed), and the camera will switch to Night mode if the
camera Alarm input connection is opened.
•
The IR-cut filter will be on, and the camera will switch to Day mode if the camera alarm
input connection is closed (shorted) again.
The network camera supports bi-directional audio. There are two supported voice band
channels that function in full duplex mode. Connect industry-standard line level audio input
and output to the back of your camera. See
information.
Audio configuration for your network camera is straightforward.
Figure 4-43
Audio Settings
Listening or Capturing Audio from the Camera
To listen to or capture audio from the camera, enable the Camera to Client (PC) check box
(
).
Listening to Audio from the Client PC
To listen to audio from the client (PC), enable the Client (PC) to Camera check box.
Connecting Audio
on page
24
for more