Path; Configuring Audio Settings; Figure 5-8 Storage Path - Honeywell Performance Series User Manual

To delete a single region of interest, select it, and then click Delete. To delete all regions of
interest, click Remove All.

Path

Go to Setup  Camera Setup  Video Path.

Figure 5-8 Storage Path

Set the storage path for snapshots (
the live interface). Click Browse to select a storage path for snapshots and recorded videos.
Click Save to save any changes to the storage paths.

Configuring Audio Settings

This function is supported by
H4W2PER2V/HBW2PER2V/HEW2PER3V/H4W4PER3V/H4W4PER2V/HEW4PE
Note
R2V/HEW4PER3V/HBW4PER2V/H4W8PER1V/H4W8PER2V/HEW8PER2V/HB
W8PER2V/HBW8PER1V.
Go to Setup  Camera Setup  Audio.
in the live interface) and for recorded video (
Configuring Camera Settings
in
33