Ip Camera Web Client; Overview - Honeywell HCD5HIH Reference Manual

IP Camera Web Client

Overview

Document 800-07067V5 Rev A
07/2013
Before you launch the Honeywell IP web client, ensure that you complete the following
sections before configuring your HCD5 series camera:
• Chapter 2, Installation and Setup
• Chapter 3, Installing the Honeywell IP Utility
This chapter covers:
• Navigating the web client interface
• Understanding the web client features and functions
• Configuring compression settings
• Configuring camera settings
• Setting tamper detection
• Configuring audio, alarm, and motion detection settings
The network camera web client is a web-based application that enables you to view video,
listen to audio, and configure camera, tamper detection, motion detection, alarm, and
audio settings for the network camera.
Certain features of the IP Camera web client are user-based and are available only to the
Administrator. Guest users are limited to the Live View tab.
4
39