Step 4: Connect To A Device And Configure Network Settings; Connecting To Or Disconnecting From Devices - Honeywell HCD5HIH Reference Manual

Step 4: Connect to a Device and Configure Network Settings

Connecting to or Disconnecting from Devices

Document 800-07067V5 Rev A
07/2013
®
HCD5 equIP Series True Day/Night Network Box Camera Reference Guide
6. Enable or disable the HTTP Server checkbox for additional security. Only an
Administrator can disable (uncheck the box), resulting in the user being unable to
access the web client, although video recording is unaffected.
Note All examples in this User Guide show the GUI for the HCD5MIH(X) model
camera, unless otherwise specified.
When you log on to the IP Utility, the devices on the network — including the devices on
other subnets — are automatically discovered and are listed in the Discovery pane. After
the initial discovery, auto-refresh continues to discover devices that are newly added to the
network.
You can also manually refresh the device discovery by clicking the Discovery icon (
located near the top of the Discovery pane.
Before configuring the IP network settings, you must connect to an IP device.
Connecting to a Device
You can connect to individual web client applications for each discovered device.
• In the Discovery pane, double-click the device to which you want to connect.
-OR-
• Select the device and click the Connect
The network settings for the connected device are displayed in the System pane.
Disconnecting from a Device
In the Discovery pane, select the device and click Disconnect
button.
.
),
31