Table 4-13 Blinding Threshold Values - Honeywell HCD5HIH Reference Manual

Document 800-07067V5 Rev A
07/2013
®
HCD5 equIP Series True Day/Night Network Box Camera Reference Guide
2. In the Blinding Threshold list, select one of the following options:
Table 4-13 Blinding Threshold Values
Value
High (80%)
Medium (50%)
Low (30%)
3. Click Apply.
Note To turn off camera blind detection, select Disable in the Blinding Threshold
list. Disable is the default value.
Note You must click Apply after you make changes to any settings to save those
changes. Settings are not saved unless you click Apply.
Configuring Camera Field of View Change Detection
The web client application can detect tampering of the camera field of view and show an
alarm message above the video display (see
Note Before changing the current Scene Change settings, you must click Reset
Scene.
Note Camera Field of View change detection works best detecting objects with sharp
edges and/or corners. Environments that are flat and/or monochrome might
trigger false alarms.
To detect a change in the camera field of view:
1. Click the Video Analytics tab.
To detect ...
Maximum blinding. The alarm message appears when your
camera is blinded by 80% or more.
Medium blinding. The alarm message appears when your
camera is blinded by 50% or more.
Minimum blinding. The alarm message appears when your
camera is blinded by 30% or more.
Figure 4-33).
73