Configuring Audio Settings; Figure 37 Audio Settings (Hc30W25R3); Figure 38 Audio Settings (Hc30Wf5R1/Hc30W25R3-12V) - Honeywell 30 Series Manual

ranging from Medium to Excellent. If you select Customized, you can enter a value
to specify the quality.
•
Maximum bit rate: Select a bit rate from the drop-down list. The bit rate ranges from
1 Mbps to a maximum of 40Mbps. If you select Customized, you can enter a value to
specify the maximum bit rate.
The Maximum bit rate setting in the Fixed quality configuration can ensure a reasonable
and limited use of network bandwidth. For example, in low light conditions where a Fixed
quality setting is applied, video packet sizes can tremendously increase when noises are
produced with electrical gains.

Configuring Audio Settings

Go to Setup  Camera Setup  Audio.
Note: HC30WF5R1/HC30W25R3-12V/HC30W25R3 supports this function.

Figure 37 Audio Settings (HC30W25R3)

Figure 38 Audio Settings (HC30WF5R1/HC30W25R3-12V)

Mute: Check to disable audio transmission from the network cameras to all clients.
Microphone source: Select Internal or External from the drop-down list.
Internal microphone input gain: Select the gain of the internal audio input according to
ambient conditions. Adjust the gain from 0% (least) to 100% (most).
External microphone input gain (HC30W25R3): Select the gain of the external audio
input according to ambient conditions. Adjust the gain from 0% (least) to 100% (most).
Audio type: Select audio codec as G.711 or G.726 and the bit rate.
32
Honeywell 30 Series IP Cameras User Guide