Adding Or Replacing Memory Modules - HP ENVY 14 User Manual

Adding or replacing memory modules

The computer has one memory module compartment. The capacity of the computer can be upgraded
by replacing the existing memory module in the primary memory module slot.
WARNING!
cord and remove all batteries before installing a memory module.
CAUTION:
any procedure, ensure that you are discharged of static electricity by touching a grounded metal
object.
To add or replace a memory module:
CAUTION:
Shut down the computer before adding or replacing memory modules. Do not remove a memory
module while the computer is on, in the Sleep state, or in Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the
power button. Then shut down the computer through the operating system.
1. Save your work and shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Unplug the power cord from the AC outlet.
4. Remove the battery cover and battery.
NOTE:
5. Remove the 5 memory module compartment cover screws (1).
6. Slide the memory module compartment cover (2) to the rear, and then remove the memory
module compartment cover.
7. If you are replacing a memory module, remove the existing memory module:
a. Pull away the retention clips (1) on each side of the memory module.
The memory module tilts up.
ENWW
To reduce the risk of electric shock and damage to the equipment, unplug the power
Electrostatic discharge (ESD) can damage electronic components. Before beginning
To prevent information loss or an unresponsive system:
For instructions on removing the battery, refer to Removing the battery on page
Adding or replacing memory modules
27.
35