Adding Or Replacing Memory Modules - HP compaq mini cq10 Manual

Chapter 3: Upgrading and routine care
6. Replace the battery 3.
7. Reconnect external power and external devices.
8. Turn on the computer.

Adding or replacing memory modules

The computer has one memory module compartment, which is located on the bottom of the
computer, beneath the removable vanity cover. The memory capacity of the computer can be
upgraded by replacing the existing memory module in the memory module slot.
WARNING: To reduce the risk of electric shock and damage to the equipment, unplug the
Å
power cord and remove all batteries before installing a memory module.
CAUTION: Electrostatic discharge (ESD) can damage electronic components. Before
Ä
beginning any procedure, ensure that you are discharged of static electricity by touching a
grounded metal object.
To replace a memory module:
CAUTION: To prevent information loss or an unresponsive system:
Ä
Shut down the computer before removing the hard drive from the hard drive bay. Do not
■
remove the hard drive while the computer is on, in the Sleep state, or in Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by
■
sliding the power switch. Then shut down the computer through the operating system.
34 Getting Started Guide