Using The Ati Catalyst Control Center; Beats Audio - HP ENVY 14 User Manual

●
Extend mode—Extends the desktop to all connected external displays along with the computer
display.
●
Projector only mode—Turns off the computer display and sets all connected external displays to
extended desktop.
NOTE: You can manage the video output and default output devices using the ATI Catalyst Control
Center. Refer to

Using the ATI Catalyst Control Center

To configure desktops and displays and to manage ATI Eyefinity, you must use the ATI Catalyst™
Control Center.
To open the ATI Catalyst Control Center:
1. Select Start > All Programs > Catalyst Control Center.
2. Click the Graphics arrow, and then select Desktops and Displays.
NOTE: For additional information on using the ATI Catalyst Control Center, refer to the software
Help.

Beats Audio

Beats Audio is an enhanced audio profile that provides a deep, controlled bass while maintaining a
clear sound. Beats Audio is enabled by default.
To increase or decrease the Beats Audio bass settings, press
▲
NOTE: You can also view and control the bass settings through the Windows operating system.
Select Start, > Control Panel > Hardware and Sound > HP Beats Audio Control Panel >
Equalization to view and control the bass properties.
The following table shows and describes the Beats Audio icons.
Item
ENWW
Using the ATI Catalyst Control Center on page 3
Description
for information.
fn (1) and the letter b
Beats Audio
(2).
3