Table of Contents
Advertisement
Understanding the printer menus
Use
PCL Emulation Settings
Lines per Page
1–255
PCL Emulation Settings
A4 Width
198 mm
203 mm
PCL Emulation Settings
Auto CR after LF
On
Off
PCL Emulation Settings
Auto LF after CR
On
Off
Tray Renumber
Assign MP Feeder
Off
None
0–199
Assign Tray [x]
Off
None
0–199
Assign Manual Paper
Off
None
0–199
Assign Manual Envelope
Off
None
0–199
To
Specify the number of lines that print on each page.
Notes:
•
60 is the U.S. factory default setting. 64 is the international factory default
setting.
•
The scanner sets the amount of space between each line based on the
Lines per Page, Paper Size, and Orientation settings. Select the Paper Size
and Orientation you want before setting Lines per Page.
Set the printer to print on A4‑size paper.
Notes:
•
198 mm is the factory default setting.
•
The 203‑mm setting sets the width of the page to allow printing of eighty
10‑pitch characters.
Specify whether the scanner automatically performs a carriage return (CR) after
a line feed (LF) control command.
Note: Off is the factory default setting.
Specify whether the scanner automatically performs a line feed (LF) after a
carriage return (CR) control command.
Note: Off is the factory default setting.
Configure the scanner to work with scanner software or programs that use
different source assignments for trays and feeders.
Notes:
•
Off is the factory default setting.
•
None ignores the Select Paper Feed command. This option appears only
when it is selected by the PCL 5 interpreter.
•
0–199 allows a custom setting to be assigned.
•
Some menu settings are available only in select printer models.
226
Advertisement
Table of Contents
