Activate The Netbeui Protocol; Install The Axis Print Utility For Os/2 - Axis NPS 550 User Manual

Activate the NetBEUI Protocol

Install the Axis Print Utility for OS/2

Axis NPS 550 User's Manual
Activating the NetBEUI protocol is done using the LAN Server/LAN
Manager Setup:
• LAN Server
Use MPTS/LAPS to activate NetBEUI (see the MPTS/LAPS docu-
mentation for details).
• LAN Manager
Use SETUP to activate NetBEUI (see the LAN Manager SETUP doc-
umentation for details).
The Axis Print Utility for OS/2 is included on the disk supplied with the
NPS 550. Start the installation according to the description in the
read.me file on the same disk. Follow the instructions on the screen to
complete the installation. The Axis Print Utility will start automatically
when the installation process is completed.
When the Axis Print Utility is running, an action bar and a list of available
Axis print server ports (initially empty) will be displayed. The action bar
contains the following commands: Status, Install, Remove, Logfile, and
Help. The Install command is used for installing new Axis print servers.
The Help command gives detailed descriptions of the actions that can be
performed by Axis Print Utility.
Section 5: Setup for OS/2
39