Setup For Os/2 - Axis NPS 550 User Manual

Section 5: Setup for OS/2
Section 5

Setup for OS/2

Before you begin:
38
The basic configuration in the OS/2 environment is done using the Axis
Print Utility for OS/2 included on the disk supplied with the NPS 550. It
comprises four steps:
1. Activate the NetBEUI protocol (if not already activated).
2. Install the Axis Print Utility for OS/2.
3. Install the NPS 550 using the Axis Print Utility.
4. Create print queues to be serviced by the NPS 550.
Before configuring your LAN Server/LAN Manager system, you may
want to configure the NPS 550 (e.g. logical printer definitions). This is
done using the AXCFG software on the disk supplied with the NPS 550.
On the disk you will find a text file called read.me, containing installation
instructions for AXCFG in the IBM OS/2 environment.
• Make sure that the NPS 550 is powered on and attached to the
network.
• Have the serial number found on the back of the NPS 550
available.
• Any network configuration should always involve the network
manager.
Axis NPS 550 User's Manual