Netbios/Netbeui Printing Using Axis Print Monitor - Axis 5470 User Manual

28
Setup for Windows 95/98, 2000 & NT

NetBIOS/NetBEUI Printing using AXIS Print Monitor

For peer-to-peer printing, the AXIS Print Monitor must be installed on all printing clients, while it
is only necessary to install it on the server for client-server printing.
Install the AXIS Print Monitor software, if you have not already done so. It can be downloaded
from the AXIS Product CD and from the AXIS WWW home page at http://www.axis.com/.
Once installed, the AXIS Print Monitor is automatically initialized on system start-up.
Important!
As the AXIS Print Monitor is an integral part of AXIS Print System, you should NOT install an
independent version of AXIS Print Monitor if AXIS Print System is already installed on your client.
To install a printer with the AXIS Print Monitor, use the Add Printer Wizard, available in your
Windows operating system. The AXIS Print Monitor's built-in Help system describes, in
step-by-step fashion, how to install your printers as NetBIOS/NetBEUI, LPR or Raw TCP/IP
printers. If you need help, start the AXIS Print Monitor Help system from the AXIS Utilities folder
or see the User's Manual.
Notes:
• As the AXIS 5470e/570/670e emulates the behavior of a local printer port, you must select the
Local Printer (Windows 95 and Windows 98) or My Computer (Windows NT) alternative
when performing the instructions in the Add Printer Wizard.
• For TCP/IP printing, it is recommended that you use the AXIS Print System Utility.
AXIS 5470e/570/670e User's Guide