Axis NPS 650 User Manual page 34

Section 4: Setup for Windows
Client-Server
printing:
Server setup
Client-Server
printing:
Client setup
34
Follow these steps to install your NPS 650 for client-server printing at a
Windows 95 server:
1. Choose a workstation that you want to use as server for network print-
ing. The server must be available at all times, and must have sufficient
hard disk space for spooling print jobs.
2. Install Axis Print Utility on the server.
3. Set up your NPS 650 as described on page 33.
4. In the Printers folder, click the right mouse button over your new
printer, then select Sharing...
5. Click the Shared As: radio button, type a name in the Share Name:
field, then click OK.
The server setup is now completed. Set up the clients as described below.
Important: Both Axis Print Utility and Print Manager must be running
when you print through your NPS 650. We strongly recommend that
you copy the Axis Print Utility icon into your StartUp folder.
Follow these steps to install your NPS 650 for client-server printing at a
Windows 95 client:
1. Open the Network Neighborhood folder and select the server where
your printer is set up (see Server setup above).
2. Select the printer, and follow the Add Printer Wizard to set up the
printer on your client.
The client setup is now completed and you can immediately print
through your NPS 650.
Axis NPS 650 User's Manual