Axis NPS 650 User Manual page 55

Note:
Axis NPS 650 User's Manual
The following properties can be configured individually for each logical
printer:
• Physical Printer Port (see table below)
• Character Set Conversion (page 56)
• Strings Before and After Print Jobs (page 57)
• String Substitutions (page 58)
• PostScript Functions (page 59)
• Action at Printer Busy (page 61)
• Hex Dump Mode (page 61)
The table below shows the default logical printer configuration:
Logical Printer Printer port
PR1 LPT1
PR2 LPT2
PR3 COM1
PR4 LPT1
PR5 LPT2
PR6 COM1
PR7 LPT1
PR8 LPT1
LF to CR+LF means that UNIX New Line commands are converted to
Carriage Return + Line Feed.
Logical printers are configured by editing a number of parameters in the
config file. There is a menu for each logical printer (PRINTER1 -
PRINTER8), see Appendix A.
Section 7: Advanced Options
Properties
pass-through
pass-through
pass-through
pass-through
LF to CR+LF
LF to CR+LF
LF to CR+LF
LF to CR+LF
55