Display Assembly - HP COMPAQ PRESARIO G42 Maintenance And Service Manual

Display assembly

Description
35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and
webcam; Presario, matte black
35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and
webcam; Presario, biscotti
35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and
webcam; HP, biscotti
35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and
webcam; HP, silver
35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and
webcam; HP, white
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Disconnect the wireless antenna cables from the WLAN module (see
6. Remove the following components:
a. Keyboard (see
b. Optical drive (see
c. Top cover (see
Remove the display assembly:
1. Turn the computer display-side up, with the front toward you.
2. Open the display as far as possible.
3. Remove the wireless antenna cables (1) from the hole and clips built into the base enclosure.
4. Disconnect the display panel cable (2) from the system board.
5. Disconnect the microphone cable (3) from the system board.
Battery on page 45).
Keyboard on page 56)
Optical drive on page
Top cover on page 58)
WLAN module on page
49)
Component replacement procedures
Spare part number
592146-001
597617-001
600163-001
606155-001
606156-001
51).
73